Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS501142
Mevotech Supreme CMS501336 front right lower control arm with ball joint for the 2019-2025 Chevrolet Silverado 1500 and other vehicles connects the front suspension to the frame. As a control arm and ball joint assembly, this Mevotech Supreme suspension control arm replaces the arm and its ball joint in one piece.
A clunk over bumps, loose steering feel or uneven tire wear can come from a worn lower control arm or ball joint. Before you replace this arm, rule out a worn tie rod end or sway bar end link, which can make similar noises. Replace both front lower arms together; this listing covers only the front right.
The 2019-2025 Chevrolet Silverado 1500, the 2019-2025 GMC Sierra 1500 and the 2021-2026 Chevrolet Tahoe all take this arm, and so do more vehicles. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One control arm with ball joint, plus the bushing, dust boot, mounting hardware and a part-specific nylon locking nut. This listing holds one arm; the front right takes one, and the front left is a separate part.
Interchange: 19534164 · 84410125 · 84586489 · 84628883 · 84729619 · 84973285 · 84973287 · 85662941 · 85662943 · CA16514 · 2609003 · 11CB503310
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Tahoe control arm right for the 2021-2026 Chevrolet Tahoe?
Yes. Mevotech Supreme CMS501336 is the front right lower control arm with ball joint for the 2021-2026 Chevrolet Tahoe.
Which side of the 2019-2025 Chevrolet Silverado 1500 control arms is this one?
This one is the front right lower arm. The left side is a separate part and is ordered on its own.
Is this control arm greaseable?
Yes. Mevotech Supreme CMS501336 is pre-greased and has a flush-style SAE grease fitting, so the joint can be greased during service.
Does this arm come with a locking nut and bushing?
Yes. The ball joint comes with a part-specific nylon locking nut, and the bushing, dust boot and mounting hardware are included.
How can I tell if the ball joint on a lower control arm is worn?
A torn dust boot, leaking grease, a clunk over bumps or uneven tire wear can mean a worn ball joint. A shop can safely check the joint for play.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.