Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS25170
Mevotech Supreme CMS501337 front left upper control arm with ball joint for the 2019-2026 Chevrolet Silverado 1500 and other vehicles connects the steering knuckle to the frame and lets the wheel move with the suspension. This Mevotech Supreme suspension control arm is built for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks.
A clunk over bumps, uneven tire wear or loose steering can mean a worn control arm and ball joint assembly, though worn parts elsewhere in the suspension can show up the same way. With the engine off, look at the dust boot and bushings for tears, cracks or leaking grease so you know the cause before replacing anything. Arms on both sides usually get changed as a pair, and this listing is one arm.
The vehicles it fits include the 2019-2026 GMC Sierra 1500 and the 2021-2026 Chevrolet Tahoe, besides the truck named above.
Fit and size
Build and materials
One control arm with ball joint, bushings, dust boot, mounting hardware, a 180 degree SAE grease fitting and a part-specific nylon locking nut. The front left takes one arm, and the front right is ordered separately.
Interchange: 527-417
19468649 · 84437973 · 84646948 · 85660606 · CB92167 · 2608764 · 8CB503201
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does this Tahoe control arm fit the 2021-2026 Chevrolet Tahoe?
Yes. Mevotech Supreme CMS501337 is a front left upper arm for the 2021-2026 Chevrolet Tahoe. If your own truck is not named on this page, look it up in the "Vehicles it fits" section.
Is this one of the 2019-2026 Chevrolet Silverado 1500 control arms for both sides?
No. This listing is one front left upper arm, and the front right upper is a separate part. Arms on both sides are normally changed together.
What is the Mevotech Supreme control arm made of?
Mevotech Supreme CMS501337 is forged steel with rubber bushings, sintered metal bearings and a neoprene dust boot. It also has a protective surface treatment.
Does the CMS501337 come with a grease fitting and locking nut?
Yes. It includes a 180 degree SAE grease fitting and a part-specific nylon locking nut, plus bushings, a dust boot and mounting hardware.
Is the ball joint on this control arm threaded or press-in?
The ball joint has a threaded stud and a press-in mounting type. It is also pre-greased and greaseable.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.