Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS861190
Mevotech Supreme CMS601325 front left lower control arm with ball joint for the 2023-2025 Honda Accord links the front left wheel to the chassis. The ball joint at its outer end lets the wheel pivot as it moves up and down and steers.
A clunk over bumps, loose steering or uneven front tire wear can mean a worn arm or ball joint. Worn sway bar links, strut mounts or tie rod ends can be behind the same signs, so find the cause before buying. Both front lower arms are normally replaced together; this listing is one arm, the front left, and the front right is ordered separately. The front axle takes one arm per side.
This is a direct-fit lower control arm for the front left of the 2023-2025 Honda Accord, and it meets or exceeds OE specifications.
Fit and size
Build and materials
One control arm with ball joint, rubber bushings, dust boot, slotted castle nut, cotter pin and mounting hardware.
Interchange: 5136030AA00 · 5CB60504 · 2609668
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a front control arm for the 2023-2025 Honda Accord?
Yes. Mevotech Supreme CMS601325 is the front left lower control arm with ball joint for the 2023-2025 Honda Accord; the right side takes its own part.
What is included with this control arm and ball joint assembly?
The ball joint, rubber bushings and dust boot are included, along with the slotted castle nut, cotter pin and mounting hardware.
Is the Mevotech Supreme suspension control arm made of aluminum?
Yes. Mevotech Supreme CMS601325 has a forged aluminum control arm with rubber bushings and a surface-treated ball joint that prevents rust build-up.
What size is this lower control arm?
This front left lower control arm measures 12.05 in at its maximum width and 15.53 in at its maximum length. The ball joint has a threaded stud and bolts in.
Does this front left lower control arm come pre-greased?
Yes. It is pre-greased, and the ball joint is secured with the part-specific slotted castle nut and cotter pin provided.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.