Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS501190
Mevotech Supreme CMS801248 front right lower control arm with ball joint for the 2019-2024 Subaru Forester and other vehicles links the front right wheel to the chassis and pivots on its ball joint. The control arm and ball joint assembly is sold as one unit.
A worn control arm or ball joint can show up as a clunk over bumps, loose steering feel or uneven front tire wear. With the engine off, look the arm over for cracked bushings, a bend or heavy rust before replacing it; a shop can measure ball joint play if the look turns up nothing.
This is a lower control arm for the 2019-2024 Subaru Forester and the 2018-2025 Subaru Crosstrek. This listing is one arm for the front right, and one is needed per vehicle at that corner; the front left is its own part, ordered separately, and the two sides are normally replaced together. The rubber bushings are already in the arm, so there are no control arm bushings to order separately for the 2019-2024 Subaru Forester.
Fit and size
Build and materials
One control arm with ball joint, along with the castle nut and cotter pin.
Interchange: 19531487 · CB72284 · 8CB80368 · RK623768 · 2609611 · 20202FL020 · 20202FL021 · 20202FL040 · 20202FL041 · X47CJ1110 · X47CJ1119
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Subaru Forester control arm for the 2019-2024 model years?
Yes. Mevotech Supreme CMS801248 fits the front right lower position on the 2019-2024 Subaru Forester; the front left uses a separate arm.
Does this work as a Subaru Crosstrek control arm for 2018-2025?
Yes. This lower control arm fits the front right position on the 2018-2025 Subaru Crosstrek, and one arm is needed on that side.
Does this control arm come with the ball joint and bushings?
Yes. The ball joint is included and pre-greased, the rubber bushings are included, and a castle nut and cotter pin come with it.
What is this lower control arm made of?
The control arm is steel with stamped steel construction and a protective surface treatment against rust. Its bushings are rubber.
How does the ball joint on the Mevotech Supreme CMS801248 attach to the vehicle?
Its threaded ball joint stud is secured to the vehicle with the part-specific castle nut and cotter pin provided. The ball joint comes pre-greased.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.