MOOG Chassis Products Suspension Control Arm and Ball Joint Assembly,Suspension Control Arm P/N:RK624063
MOOG Chassis Products RK621607 front right upper control arm with ball joint for the 2011-2015 Jeep Grand Cherokee and other vehicles joins the steering knuckle to the vehicle. This control arm and ball joint assembly is made of stamped steel with rubber bushings.
A worn ball joint or bushings can show up as a clunk over bumps, loose or wandering steering, or uneven tire wear. Before you replace this arm, rule out a worn tire, a loose wheel bearing and other front suspension parts, since each can produce similar signs.
This control arm with ball joint fits the 2011-2015 Jeep Grand Cherokee and the 2011-2015 Dodge Durango. This listing is one 2011-2015 Jeep Grand Cherokee suspension control arm for the front right; the front left is a separate part, and the other side of that axle is normally done at the same time. The front axle takes one on each side.
Fit and size
Build and materials
One front right upper control arm with ball joint and bushings, plus a grease fitting and mounting hardware.
Interchange: 810-497179B · 522-972 · 527-540 · 502-1411
45D1411 · 5181834AA · 68046196AD · 68046196AE · 68046196AF · 68046196AG · 68046196AH · 68046196AI · 68217808AA · 68217808AB · TC5216 · CB81248PR · CA8736 · CB81248 · 3CB28114 · CMS251101 · MS251101 · 2606861 · 2606861M
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the 2011-2015 Jeep Grand Cherokee control arm for the front right upper position?
Yes. MOOG Chassis Products RK621607 is the front right upper control arm with ball joint for the 2011-2015 Jeep Grand Cherokee. The left side is a separate part.
Does MOOG RK621607 work as a 2011-2015 Dodge Durango control arm?
Yes. RK621607 fits the 2011-2015 Dodge Durango as the front right upper arm, and the front left is ordered separately.
Does this control arm with ball joint come with mounting hardware?
Yes. The ball joint, bushings, grease fitting and mounting hardware are all included with this arm.
Is the ball joint on this MOOG arm greaseable?
Yes. The socket is greaseable and the arm comes pre-greased, with a grease fitting included so new lubricant can flush out contaminants.
Is 68046196AD interchangeable with MOOG RK621607?
Yes. 68046196AD is on the interchange list for MOOG RK621607, the front right upper control arm with ball joint.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.