Mevotech Supreme Suspension Control Arm Bushing P/N:MS254264
Help cushion your front suspension and keep the lower control arm firmly located with the Mevotech Supreme Control Arm Bushing, part number MS864153. It fits many vehicles, among them the 2006-2018 Toyota RAV4, 2015-2022 Toyota Prius and 2019-2022 Toyota Prius AWD-e, and is a direct-fit replacement for the listed applications in the front lower forward position.
This suspension control arm bushing sits at the forward mount of the front lower control arm. There it cushions the arm's pivot against the chassis and helps absorb road shock and vibration before they reach the cabin. Mevotech builds it from high grade natural rubber for increased durability and describes its fit and performance as OE quality.
Signs that a control arm bushing may need replacing include clunking or knocking over bumps, a loose or wandering steering feel, vibration through the chassis, uneven tire wear, and rubber that is cracked, torn or separated. If a worn bushing is the cause, MS864153 replaces it. Ball joints, tie rods and struts can produce similar symptoms, so diagnose the suspension before you replace parts. If you are shopping for a 2015-2022 Toyota Prius control arm bushing, confirm your exact model and year in the Buyer's Guide tab.
Is MS864153 the right control arm bushing for a 2006-2018 Toyota RAV4?
It is listed for the 2006-2018 Toyota RAV4 in the front lower forward position. Check the Buyer's Guide tab to confirm your exact vehicle.
Does this bushing fit the 2015-2022 Toyota Prius?
It is listed for the 2015-2022 Toyota Prius and the 2019-2022 Toyota Prius AWD-e in the front lower forward position. The Buyer's Guide tab shows every listed application.
What is this control arm bushing made of?
Mevotech states that it uses high grade natural rubber construction for increased durability, with OE-quality fit and performance.
What are signs of a worn control arm bushing?
Common signs include clunking over bumps, a wandering steering feel, uneven tire wear, and cracked or torn rubber. Other suspension parts can cause similar symptoms, so diagnose the problem before replacing parts.
How is a control arm bushing installed?
Control arm bushings are typically pressed into the arm. Follow the vehicle's service information for the procedure and torque specs, and have the alignment checked after installation.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.