KYB 565074 rear shock absorber for the 1988-1999 Chevrolet K1500 and other vehicles damps rear axle movement on trucks. This KYB shock absorber is a high pressure monotube gas design from the MonoMax line, made just for trucks.
- KYB MonoMax large-bore monotube design for heavier, more powerful or high center of gravity trucks
- Zinc-coated piston ring for a positive seal
- Rubber boot protects the shaft and keeps dirt and debris away from the seals
- Design adjusts automatically to driving conditions with fade-free performance
- Engineered to help vehicles with electronic safety systems such as ESC and ABS
Quick facts
- Part: KYB 565074 shock absorber
- Also called: high pressure monotube gas shock
- Fits: 1988-1999 Chevrolet K1500 and other vehicles
- Position: Rear
- Condition: New
A worn rear shock can show up as a bouncy or floaty ride, the rear end dipping under load, or fluid on the shock body. Before you replace the shock, rule out worn bushings, loose mounts and tire problems, since those can produce similar symptoms.
Fits
The vehicles covered include the 1995-2000 Chevrolet Tahoe and the 1995-1999 GMC Yukon alongside the 1988-1999 Chevrolet K1500. Open the "Vehicles it fits" section to check your exact model and engine. This listing is one rear shock, and the other rear shock on that axle is normally replaced at the same time.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
Build and materials
- Type: High pressure monotube gas shock
- Piston ring: Zinc-coated
- Dust boot: Rubber off-road dust boot
- Condition: New
In the box
One rear shock absorber with an off-road dust boot. The vehicle takes two, one for each side of the rear axle.
Frequently Asked Questions
Is this KYB rear shock absorber right for the 1988-1999 Chevrolet K1500?
Yes. KYB 565074 fits the 1988-1999 Chevrolet K1500, and each truck takes two.
Does the KYB 565074 shock come with a dust boot?
Yes. The KYB 565074 includes an off-road dust boot, and its rubber boot keeps dirt and debris away from the shaft seals.
Is this KYB gas shock absorber a monotube design?
Yes. This rear shock is a high pressure monotube gas design with a zinc-coated piston ring that gives a positive seal.
How do I spot a worn rear monotube shock?
A bouncy ride, a rear end that dips under load or fluid on the shock body can point to wear. A shop can test the shock further.
Is this rear shock made for trucks with ABS and ESC?
Yes. The KYB 565074 is engineered to help vehicles with electronic safety systems such as ESC and ABS.
