The Delphi TC6770 rear sway bar link for the 2017-2020 Hyundai Elantra and other vehicles connects the sway bar to the rear suspension so the bar can control body roll when you corner.
- Built on Delphi's OE engineering experience, with dimensional and material analysis for close compatibility with the OE part.
- Tested to withstand temperatures below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray.
- Made with ultrasonic molding to help prevent future weld breakage.
- Fatigue tested to avoid failure.
- Machined to micron tolerances for durability and smooth joint operation.
- Anti-corrosion protection is applied to each part to fight corrosion and keep a clean look.
A worn rear sway bar link can show up as a clunk or rattle from the rear over bumps, more body lean in turns, or a loose joint found during a suspension inspection. Worn sway bar bushings, shock absorbers or other rear suspension parts can make similar noises, so pin down the cause before you buy.
It is listed for a wide range of Hyundai and Kia models, including the 2020-2024 Kia Forte and the 2019-2023 Hyundai Kona Electric, and these cars take two at the rear, so order two and fit them together. If your Hyundai or Kia isn't named here, open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
Build and materials
- Manufacturing: ultrasonic molding
- Machining: micron tolerances
- Testing: fatigue tested; 720 hours of salt spray; below -40 degrees C to over 120 degrees C
- Finish: anti-corrosion protection
Interchange: 1018653 · SL60825PR · 55530G2000 · KSLR4118 · SL60825 · K750892 · MS908121
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
1018653, SL60825PR, 55530G2000, KSLR4118, SL60825, K750892, MS908121
Frequently Asked Questions
Will the Delphi TC6770 fit the rear of a 2020-2024 Kia Forte?
Yes. The Delphi TC6770 rear sway bar link fits the 2020-2024 Kia Forte, and the car takes two at the rear.
Is this Delphi stabilizer bar link salt-spray and cold tested?
Yes. The Delphi TC6770 is exposed to 720 hours of salt spray and tested to withstand temperatures below -40 degrees C and over 120 degrees C.
Why is ultrasonic molding used on this sway bar link?
This sway bar link is made with ultrasonic molding to help prevent future weld breakage, and it is fatigue tested to avoid failure.
What can a clunk from the back over bumps mean for a rear sway bar link?
A clunk or rattle from the rear over bumps, extra body lean in turns, or a loose joint can mean the rear sway bar link is worn.
How precise is the machining on this rear sway bar link joint?
This rear sway bar link is machined to micron tolerances for durability and smooth joint operation, and anti-corrosion protection is applied to each part.
