Delphi Suspension Stabilizer Bar Link P/N:TC8056
Keep your front-right suspension tight and quiet with the Delphi Suspension Stabilizer Bar Link TC6417. This sway bar link connects the stabilizer bar to the suspension so the bar can do its job of limiting body roll, and it installs as a direct-fit replacement for the front-right position on the 2000-2006 Honda Insight. Delphi applies its OE steering-and-suspension expertise to the aftermarket, testing to the extreme for OE-level performance — parts endure temperatures below -40°C and over 120°C and 720 hours of salt spray, with extensive dimensional and material analysis for close compatibility between the OE and aftermarket part.
Worn links often announce themselves with clunks or rattles over bumps and looser handling; if a failed link is the cause, this replaces it. Sold individually — for even handling, inspect and replace both sides as needed.
Interchange: 101-5255 · 51320-S3Y-003
1015255 · 51320S3Y003 · SL59032 · SL59032PR · K750173 · GS60810 · GS60811 · MS60811 · JTS1456
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What vehicle does the Delphi TC6417 fit?
It is a direct-fit replacement for the front-right sway bar link on the 2000-2006 Honda Insight. See the "Vehicles it fits" section to confirm your exact vehicle.
What does a sway bar link do?
It connects the stabilizer (sway) bar to the suspension, letting the bar limit body roll and keep the two sides of the suspension working together for steadier handling.
What position is this link?
The TC6417 is cataloged for the front-right position. It is sold individually, so order the corresponding link separately if you also need the other side.
What are signs this link may need replacing?
Clunking or rattling over bumps and looser, less controlled handling can be signs of a worn link. Diagnose the cause first, since other suspension parts can produce similar symptoms.
How is the TC6417 built for durability?
It uses ultrasonic molding to help prevent weld breakage, is fatigue tested, is machined to micron tolerances for smooth joint operation, and gets anti-corrosion protection on each part.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.