Delphi TC6027 front sway bar link for the 1996-2006 Dodge Viper and other vehicles ties the front sway bar to the suspension to limit body roll. Also called a stabilizer bar link, it passes force between the bar and the suspension in corners.
- Ultrasonic molding to help prevent future weld breakage
- Fatigue tested to avoid failure
- Machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
- Withstands temperatures below -40 degrees C and over 120 degrees C, and 720 hours of salt spray exposure
Quick facts
- Part: Delphi TC6027 sway bar link
- Also called: stabilizer bar link
- Fits: the 1996-2006 Dodge Viper and other vehicles
- Position: Front
- Condition: New
A worn front link can clunk or rattle over bumps, loosen the feel of the front end or let the car lean more in corners. Worn bar bushings, strut mounts or control arm joints can be behind those signs too, so pin down the cause before you buy a link.
Fits
This sway bar link fits the 1996-2006, 2008-2010 and 2015-2017 Dodge Viper and the 2013-2014 SRT Viper V10 8.4L. This listing is one link; the other side of the front axle is normally done at the same time.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
Build and materials
- Condition: New
- Construction: ultrasonic molding
- Joint: machined to micron tolerances
- Finish: anti-corrosion protection on each part
In the box
One sway bar link. These cars take two on the front axle.
Interchange: 68231 477AA
4763147 · K750254 · GK80408 · MS25831 · JTS1519
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
4763147, 68231 477AA, K750254, GK80408, MS25831, JTS1519
Frequently Asked Questions
Will the Delphi TC6027 work on a 2013-2014 SRT Viper V10 8.4L?
Yes. Delphi TC6027 is a front sway bar link that fits the 2013-2014 SRT Viper V10 8.4L, and the car takes two of them.
How is this Delphi sway bar link made to resist breaking?
Ultrasonic molding helps prevent weld breakage later on, and the link is fatigue tested to avoid failure. The joint is machined to micron tolerances for smooth operation.
Is 4763147 a cross-reference number for the Delphi TC6027 sway bar link?
Yes. 4763147 is one of the other-brand and OE numbers listed for Delphi TC6027 on the Interchange line, along with K750254, GK80408, MS25831, JTS1519 and 68231 477AA.
What might a worn front sway bar link sound or feel like?
A worn link can clunk or rattle over bumps, make the front end feel loose or let the car lean more through corners.
Does this front sway bar link have corrosion protection?
Yes. Anti-corrosion protection is applied to each Delphi TC6027 link, and the part is exposed to 720 hours of salt spray and tested below -40 degrees C and over 120 degrees C.
