Monroe 272535 front right strut assembly for the 2010-2011 Ford Flex is a Quick-Strut that combines strut, spring and mount in one unit. This Monroe quick strut assembly is also called a complete strut and coil spring assembly.
- Quick-Strut design: strut, coil spring and upper strut mount come preassembled, so no spring compressor is needed
- Coil spring is engineered to restore ride height and support the vehicle's weight
- Vehicle-specific coil spring, mount and strut designs, fit checked and ride tested
- Reduces body sway, vibration and road harshness before they reach the passenger cabin
- Upper strut mount helps keep steering precise and limits noise, vibration, harshness and memory steer
- Protective coating resists rust and corrosion and is salt spray tested
Quick facts
- Part: Monroe 272535 strut assembly
- Also called: complete strut and coil spring assembly
- Fits: 2010-2011 Ford Flex
- Position: Front right
- Condition: New
A worn strut assembly can show up as a bouncy ride, nose dive under braking or a clunk over bumps. These signs alone do not prove the strut is at fault, since worn tires can cause some of the same ride and handling complaints.
Fits
It is a direct-fit replacement for the 2010-2011 Ford Flex. This listing is one strut for the front right; the front left is a separate part, and both are normally replaced together on the front axle.
Specifications
Fit and size
- Position: Front right
- Quantity per application: 1
- Body length: 11.78 in
- Compressed length: 12.1 in (307.3 mm)
- Extended length: 19.22 in (488.2 mm)
- Travel length: 7.12 in
Build and materials
- Type: Gas-charged, passive suspension
- Adjustable compression: No
- Adjustable ride height: No
- Condition: New
- Warranty: Monroe Limited Lifetime Warranty and Feel the Difference™ Guarantee
- Assembled in: Paragould, Arkansas
In the box
One front right strut assembly with its coil spring, upper strut mount, coil spring insulator and strut mount insulator, plus mounting hardware. This listing holds one assembly, and the front right position takes one.
Interchange: LS3485451R · 34FD1164
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
LS3485451R, 34FD1164, 272535
Frequently Asked Questions
Does the Monroe strut assembly 272535 fit the front right of the 2010-2011 Ford Flex?
Yes. Monroe 272535 is the front right strut assembly for the 2010-2011 Ford Flex. The front left side takes a separate part.
Does the Monroe quick strut strut and coil spring assembly come with the upper mount?
Yes. Monroe 272535 includes the coil spring, upper strut mount, both insulators and mounting hardware in one assembled unit.
How long is the Monroe complete strut assembly when compressed and extended?
This strut assembly measures 12.1 in (307.3 mm) compressed and 19.22 in (488.2 mm) extended, with 7.12 in of travel.
Is a bouncy ride or a clunk over bumps a sign this gas-charged strut is worn?
Yes, those can be signs, along with nose dive when braking. Fluid on the strut body is something you can see with the engine off, and a shop can inspect it.
What warranty comes with the Monroe 272535 strut?
Monroe backs this strut assembly with its Limited Lifetime Warranty and its Feel the Difference™ Guarantee.
