Monroe Shocks & Struts Suspension Strut and Coil Spring Assembly P/N:153032L
Monroe Shocks & Struts 272934 front right strut assembly for the 2013-2022 Chevrolet Trax and other vehicles controls spring movement and damps road shock at the front right wheel. Also called a complete strut and coil spring assembly, it is built to restore ride height and ride performance.
A worn front strut can show up as excess body sway, bouncing or a clunk over bumps. Before you replace this assembly, rule out worn tires, loose wheel hardware or a worn sway bar link, since those can produce similar noise and handling complaints.
It fits the 2013-2022 Chevrolet Trax and the 2013-2022 Buick Encore. Each car needs one for the front right; the front left is its own part, ordered separately, and the two sides are normally replaced together.
Fit and size
Build and materials
One front right strut assembly with the coil spring, strut mount, coil spring insulator, strut mount insulator and mounting hardware.
Interchange: 2701700538 · 95266855 · 18920077 · 95440472 · LS3486231R · 2333716R · 882601 · G52495 · SR4710 · 33GM1206 · NS272934 · PM7001126 · 920077 · 920334 · 92141141 · SCA71188 · 11718 · 78A11718
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Monroe 272934 strut assembly fit the 2013-2022 Buick Encore?
Yes. Monroe Shocks & Struts 272934 fits the 2013-2022 Buick Encore and the 2013-2022 Chevrolet Trax in the front right position, and each needs one for that side.
Does the Monroe Quick-Strut 272934 come with the coil spring and upper mount?
Yes. This front right strut assembly includes the coil spring, strut mount, both insulators and mounting hardware in one preassembled unit.
How long is the Monroe 272934 strut when compressed and extended?
The Monroe 272934 measures 14.93 in (379.2 mm) compressed and 19.51 in (495.6 mm) extended, with 4.58 in of travel. It is gas charged.
My front right side bounces and clunks over bumps; could this strut assembly be the reason?
It can be. Bouncing, body sway or a clunk over bumps can come from a worn strut or spring, among other causes, and a shop can confirm which.
Do I need a spring compressor to install this Monroe Quick-Strut assembly?
No. The coil spring, upper mount and strut come fully assembled in one unit, so no spring compressor is needed.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.