KYB 341351 front right suspension strut assembly for the 2003-2008 Mazda 6 damps wheel and body movement at the front right corner. This KYB strut assembly is made on the same OE assembly lines that supply new vehicle manufacturers and is calibrated to restore original, designed performance rather than change it.
- KYB Excel-G line with a nitrogen gas-charged, twin-tube design
- Triple lip fluid seal to reduce the chance of oil and gas leaking out
- Vehicle-specific, hand-assembled in-house damping valves manage tire contact, steering response and body movement
- Thick strut body and brackets minimize flex to maintain correct alignment in all conditions
- Helps keep electronic safety systems performing as designed
Quick facts
- Part: KYB 341351 suspension strut assembly
- Fits: 2003-2008 Mazda 6
- Position: Front right
- Condition: New
A worn front strut can show up as a bouncy ride, nose dive under braking or oil on the strut body. Worn strut mounts, tires, sway bar links or an alignment problem can be behind some of those signs as well, so pin down the cause before you buy. Front struts are normally replaced as a pair, so plan on the other side too; this listing is one strut, for the front right.
Fits
It is a direct-fit replacement for the 2003-2008 Mazda 6 at the front right position. A 2003-2008 Mazda 6 strut replacement takes one strut per side, and the front left is ordered separately.
Specifications
Fit and size
- Position: Front right
- Quantity per vehicle: 1
Build and materials
- Design: nitrogen gas-charged, twin-tube
- Seal: triple lip fluid seal
- Condition: New
Interchange: G51811 · GK2A34700G · GK2C34700H · GK2C34700J · GK2C34700K · GM9A34700C · GM9A34700D · GM9A34700F · GM9A34700G · GM9A34700H · GM9C34700C · GP7C34700A · GP7C34700B · 72195
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
G51811, GK2A34700G, GK2C34700H, GK2C34700J, GK2C34700K, GM9A34700C, GM9A34700D, GM9A34700F, GM9A34700G, GM9A34700H, GM9C34700C, GP7C34700A, GP7C34700B, 72195
Frequently Asked Questions
Is the KYB front strut assembly 341351 right for the 2003-2008 Mazda 6?
Yes. KYB 341351 is the front right strut for the 2003-2008 Mazda 6; the front left side is a separate part.
Is the KYB Excel-G strut assembly gas-charged?
Yes. This KYB 341351 is a nitrogen gas-charged, twin-tube design with a triple lip fluid seal to reduce the chance of oil and gas leaking out.
How can I tell if a KYB suspension strut is worn?
Oil on the strut body, a bouncy ride or nose dive under braking can be signs of wear. A shop can inspect and test the strut if you are unsure.
Are new strut mounts recommended with this front strut?
Yes. New strut mounts, part number SM5428, are recommended to reduce the chance of noise and vibration; they are not part of this listing.
Is KYB 341351 interchangeable with part number GK2C34700H?
Yes. GK2C34700H is one of the numbers this KYB 341351 front right strut replaces.
