Firm up your track bar mounting and take the slop out of your steering with the TeraFlex Track Bar Bushing (MPN 835770). This press-in replacement swaps out a worn, OEM-style rubber bushing and fits either the front or rear track bar on the Jeep JK platform the manufacturer lists it for.
A track bar locates the axle side-to-side, and its bushings take the load every time you turn or hit a bump. Signs the original bushing may need replacing include cracked or deteriorated rubber, a loose or wandering feel, or front-end shimmy. If a worn track bar bushing is the cause, this press-in bushing replaces it. See the Buyer's Guide tab to confirm fitment for your vehicle.
What does this track bar bushing do?
It presses into the track bar eye and connects the axle to the frame, locating the axle side-to-side and absorbing load as you steer and drive over bumps.
Does it fit the front or rear track bar?
The manufacturer states it fits either the front or rear track bar.
How is this different from the OEM bushing?
It builds on the OEM-style rubber bushing by adding a rate plate for more responsive handling and superior control, plus improved durability and tunability.
What are signs my track bar bushing needs replacing?
Watch for cracked or deteriorated rubber, a loose or wandering steering feel, or front wheel shimmy. Diagnose the cause before replacing.
How is it installed?
It is a press-in bushing that installs into the track bar in place of the worn original. Consult the vehicle service information for the correct procedure.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
