TERREPOWER 17908 starter for the 2003-2008 Mazda 6 4-cylinder 2.3L and the 2009-2010 6 4-cylinder 2.5L spins the engine over so it can start. This remanufactured starter has its solenoid attached, which pushes the drive toward the flywheel when you start the engine.
- Permanent magnet gear reduction design rated 1.4 kW at 12 V DC
- 11-tooth drive with clockwise (right) rotation
- Closed nose cone
- Designed for dependability and reliability throughout the service life of the vehicle
Quick facts
- Part: TERREPOWER 17908 starter
- Fits: 2003-2008 Mazda 6 4-cylinder 2.3L and the 2009-2010 6 4-cylinder 2.5L
- Condition: Remanufactured
A worn starter can show up as slow cranking, a click with no crank, or a grinding noise at start-up. Before you replace the starter, rule out a weak battery and loose or corroded battery cable connections, since those can look much the same from the driver's seat.
Fits
This starter is a direct-fit replacement for the 2003-2008 Mazda 6 4-cylinder 2.3L and the 2009-2010 6 4-cylinder 2.5L; a car takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Voltage: 12 V DC
- Power rating: 1.4 kW
- Tooth quantity: 11
- Rotation direction: Clockwise (Right)
- Nose cone type: Closed nose
Build and materials
- Design: Permanent magnet gear reduction
- Solenoid: attached
- Starter drive: included
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured starter with the starter drive included. Mounting bolts and mounting shims are not included; plan on new bolts, since the old ones may not be reusable.
Interchange: 3M81-11002-BB · L321-18-400 · L321-18-400A
M0T87781 · M0T87781ZC
This part cross-references / interchanges with the following part numbers:
3M81-11002-BB, L321-18-400, L321-18-400A, M0T87781, M0T87781ZC
Frequently Asked Questions
Is this TERREPOWER 17908 starter right for the 2003-2008 Mazda 6 4-cylinder 2.3L?
Yes. TERREPOWER 17908 fits the 2003-2008 Mazda 6 4-cylinder 2.3L and the 2009-2010 6 4-cylinder 2.5L, with one starter per car.
Do the mounting bolts come with this remanufactured starter?
No. TERREPOWER 17908 does not include mounting bolts or mounting shims. The starter drive is included and the solenoid is attached.
What voltage and rotation direction does this gear reduction starter have?
This starter runs on 12 V DC, is rated at 1.4 kW and turns clockwise (right). Its drive has 11 teeth.
Does this starter have over-crank protection?
No. This remanufactured starter has no over-crank protection. It has a permanent magnet gear reduction design with a closed nose cone.
Does 3M81-11002-BB cross to this TERREPOWER starter?
Yes. 3M81-11002-BB is listed as an interchange number for TERREPOWER 17908, along with L321-18-400 and L321-18-400A.
