TERREPOWER 19133 starter for the 2010-2012 Jeep Liberty V6 3.7L and other vehicles spins the engine over so it can start. This remanufactured starter is designed for dependability and reliability throughout the vehicle's service life.
- Permanent magnet gear reduction design
- 1.0 kW power rating at 12 volts DC
- Tooth quantity of 10 with clockwise (right) rotation
- Closed nose cone
- Solenoid attached and starter drive included
Quick facts
- Part: TERREPOWER 19133 starter
- Fits: 2010-2012 Jeep Liberty V6 3.7L and other vehicles
- Condition: Remanufactured
A single click, slow cranking or no crank when you turn the key can mean the starter is worn. A weak battery, corroded battery cables or a loose ground connection can be behind those signs too, so find out which one is at fault before you buy. If the starter is the cause, this unit replaces it.
Fits
This starter is a direct-fit replacement for the 2010-2012 Jeep Liberty V6 3.7L and the 2010-2011 Dodge Nitro V6 3.7L, and a single starter goes on either one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Rotation: Clockwise (right)
- Tooth quantity: 10
- Voltage: 12 V DC
- Power rating: 1.0 kW
- Nose cone type: Closed nose
Build and materials
- Design: Permanent magnet gear reduction
- Solenoid: Attached
- Starter drive: Included
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One starter. Mounting bolts and mounting shims are not included, so plan on new bolts rather than reusing the old ones.
Interchange: 04801854AA · 4801854AA · M000T32972 · M0T32972 · M0T32972ZC
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
04801854AA, 4801854AA, M000T32972, M0T32972, M0T32972ZC
Frequently Asked Questions
Does the TERREPOWER 19133 work as a 2010-2012 Jeep Liberty V6 3.7L starter?
Yes. TERREPOWER 19133 is a direct-fit replacement starter for the 2010-2012 Jeep Liberty V6 3.7L, which takes one.
Is this a 2010-2011 Dodge Nitro V6 3.7L starter?
Yes. This remanufactured starter is a direct-fit replacement for the 2010-2011 Dodge Nitro V6 3.7L, and that vehicle takes one.
Does the TERREPOWER 19133 come with mounting bolts or shims?
No. Mounting bolts and mounting shims are not included. The starter comes with its solenoid attached and the starter drive included, so plan on new bolts.
How many teeth and which rotation does this gear reduction starter have?
This starter has 10 teeth and turns clockwise (right). It is a 12-volt DC permanent magnet gear reduction design rated at 1.0 kW.
Is 04801854AA an interchange number for this TERREPOWER starter?
Yes. 04801854AA is one of the numbers TERREPOWER 19133 replaces, along with 4801854AA and M0T32972.
