TERREPOWER 19141 starter for the 2011-2014 Chrysler 200 4-cylinder 2.4L and other vehicles cranks the engine so it can start. This remanufactured starter motor is designed for dependability and reliability throughout the service life of the vehicle.
- Permanent magnet gear reduction design
- 12-volt DC motor with a 1.0 kW power rating
- Clockwise (right) rotation with a tooth quantity of 8
- Solenoid attached and starter drive included
- Closed nose cone
Quick facts
- Part: TERREPOWER 19141 starter
- Fits: the 2011-2014 Chrysler 200 4-cylinder 2.4L and other vehicles
- Condition: Remanufactured
A slow crank, a single click or a grinding noise at start-up can mean this starter is worn, though a weak battery or a corroded battery terminal can be behind them as well, so find the cause before replacing it.
Fits
It is a direct-fit replacement for the 2011-2014 Chrysler 200 4-cylinder 2.4L and the 2011-2014 Dodge Avenger 4-cylinder 2.4L, and each of them takes one starter.
Specifications
Fit and size
- Quantity per vehicle: 1
- Voltage: 12 V DC
- Power rating: 1.0 kW
- Tooth quantity: 8
Build and materials
- Design: permanent magnet gear reduction
- Rotation direction: clockwise (right)
- Nose cone type: closed nose
- Over-crank protection: no
- Condition: remanufactured
- OE manufacturer: Mitsubishi
- Country of origin: Mexico
In the box
One remanufactured starter. Mounting bolts and mounting shims are not included, so plan on new bolts rather than reusing the old ones.
Interchange: 56029584AA · M000T34071 · M0T34071
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
56029584AA, M000T34071, M0T34071
Frequently Asked Questions
Is this a 2013 Dodge Avenger starter for the 4-cylinder 2.4L engine?
Yes. TERREPOWER 19141 fits the 2011-2014 Dodge Avenger 4-cylinder 2.4L, so the 2013 model year is covered.
Does the TERREPOWER 19141 starter come with mounting bolts?
No. This TERREPOWER 19141 starter does not include mounting bolts or mounting shims. The starter drive is included and the solenoid is already attached.
Is this a gear reduction starter with a closed nose?
Yes. This starter has a permanent magnet gear reduction design and a closed nose cone. It runs on 12 volts DC and turns clockwise (right).
Which signs can show a gear reduction starter is wearing out?
Slow cranking, a grinding noise when starting or a click with no crank can be signs of a worn starter. A shop can test the starter and battery on the car.
Does TERREPOWER 19141 replace number 56029584AA?
Yes. 56029584AA is one of the numbers TERREPOWER 19141 replaces, along with M000T34071 and M0T34071.
