National Clutch Release Bearing P/N:614072
Timken 614072 clutch release bearing for the 1990-1997 Honda Accord 4-cylinder 2.2L, the 1995-1997 Accord V6 2.7L, the 1998-2002 Accord 4-cylinder 2.3L or V6 3.0L and other vehicles presses against the clutch pressure plate when you push the pedal in. It meets or exceeds OE bearing performance requirements.
A worn clutch release bearing can show up as a whirring or grinding noise when the pedal is pressed, or as a rough feel at the pedal. These signs alone do not prove the bearing is the problem, because a worn clutch disc could also be behind them. The clutch takes one bearing, and this listing is one.
This bearing is listed for a wide range of Honda and Acura models. Besides the Accord above, that includes the 1997-2001 Honda CR-V 4-cylinder 2.0L and the 1990-1991 Honda Prelude 4-cylinder 2.0L or 2.1L, the 1992-1996 Prelude 4-cylinder 2.3L and the 1992-2001 Prelude 4-cylinder 2.2L. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Interchange: N4046 · N4089
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Timken 614072 clutch release bearing fit the 1997-2001 Honda CR-V 4-cylinder 2.0L?
Yes, Timken 614072 is listed for the 1997-2001 Honda CR-V with the 4-cylinder 2.0L engine. For any other car, open the "Vehicles it fits" section and check your model and engine.
Is this clutch release bearing sealed?
Yes. Timken 614072 is a sealed, self-aligning ball bearing supplied as an assembly.
How is the Timken 614072 tested?
The design, materials and manufacturing process used to make Timken bearings are tested for consistent performance. This bearing is listed as meeting or exceeding OE bearing performance requirements.
What noises can a failing clutch release bearing make?
A worn release bearing can produce a whirring or grinding noise when the clutch pedal is pressed, or a rough feel at the pedal. If you notice either, have a shop inspect the clutch.
Does Timken 614072 interchange with N4046?
Yes, N4046 is listed as an interchange number for Timken 614072. N4089 is the other number listed.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.