TrakMotive CV Axle Shaft P/N:IZ-8021
TrakMotive MB-8021 front right CV axle shaft for the 2010-2012 Mercedes-Benz GL350 and other vehicles carries drive torque to the wheel. Its joints flex with suspension travel and steering movement so power keeps reaching the tire.
A clicking noise in turns, grease thrown from a torn boot or vibration under acceleration can mean this axle is worn, though a wheel bearing or a tire problem can sit behind the same signs.
Besides the 2010-2012 Mercedes-Benz GL350, it fits the 2007-2012 Mercedes-Benz GL450, the 2008-2012 Mercedes-Benz GL550 and many other Mercedes-Benz models. The 2007-2012 Mercedes-Benz GL450 takes one on the front right; this listing is one axle, the front left is a separate part, and both sides are normally replaced together.
Fit and size
Build and materials
One CV axle shaft with its axle nut. The ABS tone ring is not included.
Interchange: 66-9296 · 60-9296 · ME-2410 · 80-7211 · ME-8-8507
229021 · NCV48001 · NCV48052 · PR48001 · 76776 · 40733019 · 1643301901 · 164330190180 · 1643302401 · ME10517
This part cross-references / interchanges with the following part numbers:
Is the TrakMotive MB-8021 axle right for the 2010-2012 Mercedes-Benz GL350?
Yes. TrakMotive MB-8021 is the front right CV axle shaft for the 2010-2012 Mercedes-Benz GL350 and fits many other vehicles. If your car isn't named here, look it up in the "Vehicles it fits" section.
Does the TrakMotive CV axle come with the axle nut?
Yes. TrakMotive MB-8021 includes a self-locking axle nut. The ABS tone ring is not included.
How many splines does this CV axle shaft have at each end?
The male inboard joint has 37 splines and the conventional outboard joint has 30 splines. Overall compressed length is 1000 mm (39.37 in).
How can I spot a damaged boot on a front right CV axle?
With the engine off and cool, look for a torn neoprene boot or grease thrown around the joint. Clicking in turns is what a driver notices; a shop can confirm joint wear.
What size is the axle nut on this CV axle shaft?
The nut has a 36 mm (1.42 in) hex and an M24x1.5 thread. It is a self-locking hex nut.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.