TrakMotive Drive Shaft Assembly P/N:CHP-430
TrakMotive CHP-435 rear drive shaft for the 2006-2010 Jeep Grand Cherokee carries engine torque toward the rear axle.
A vibration at highway speed, a clunk when shifting or accelerating, or a shudder when pulling away can mean a worn drive shaft. Tires and wheel balance can also cause vibration, so look the tires over with the engine off for uneven wear or bulges first. If the drive shaft is the cause, this one replaces it.
This drive shaft assembly fits the 2006-2010 Jeep Grand Cherokee, and the vehicle takes one.
Fit and size
Build and materials
One drive shaft with its slip yoke. CV joints and a grease fitting are not included.
Interchange: 936-072
52853003AB
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the TrakMotive CHP-435 among the 2006-2010 Jeep Grand Cherokee drive shafts for the rear?
Yes. TrakMotive CHP-435 is a rear drive shaft for the 2006-2010 Jeep Grand Cherokee, and that vehicle takes one.
Does this rear drive shaft include the slip yoke, CV joints and a grease fitting?
The slip yoke is included and the shaft comes pre-greased. CV joints and a grease fitting are not included.
How long and how thick is the TrakMotive CHP-435 shaft?
TrakMotive CHP-435 measures 1036 mm (40.81 in) compressed, with a shaft diameter of 70 mm (2.75 in).
What is the tube of this rear drive shaft made of, and where is it made?
The tube material is steel, and the country of origin is China.
Does the TrakMotive CHP-435 replace part number 936-072?
Yes. 936-072 is an interchange number for this rear drive shaft, along with 52853003AB.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.