Keep fuel moving from the tank to the engine with the US Motor Works Fuel Pump Module Assembly USEP8677M. It installs as a direct-fit replacement for the 2005-2009 Hyundai Tucson (L4-2.0L and V6-2.7L) and the 2005-2010 Kia Sportage (L4-2.0L and V6-2.7L), swapping in for the original in-tank fuel pump module.
Signs the original module may need replacing include hard starting, extended cranking, stalling, and sputtering or hesitation under load, sometimes with a whining noise from the fuel tank. Because these symptoms can have other causes, diagnose the fuel system before replacing — if a failed fuel pump module is the cause, this unit replaces it. Manufacturer part number USEP8677M.
What does the US Motor Works USEP8677M do?
It's a fuel pump module assembly that draws fuel from the tank and delivers it to the engine's fuel system, replacing the original in-tank module.
Which vehicles does it fit?
It's a direct-fit replacement for the 2005-2009 Hyundai Tucson (L4-2.0L, V6-2.7L) and 2005-2010 Kia Sportage (L4-2.0L, V6-2.7L). Check the Buyer's Guide tab to confirm your vehicle.
What are signs my fuel pump module may need replacing?
Hard starting, long cranking, stalling, sputtering or hesitation under load, and a whine from the fuel tank. These can have other causes, so diagnose the fuel system first.
Is this a complete module assembly?
Yes, it is supplied as a single in-tank module assembly that replaces the original unit on the listed applications.
Will replacing this fix a no-start?
Only if a failed fuel pump module is the cause. A no-start can stem from other fuel, electrical, or ignition faults, so confirm the diagnosis before replacing.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
