FEL-PRO Engine Valve Cover Gasket Set P/N:VS 4569
FEL-PRO VS 12692 valve cover gasket set for the 1964-1965 Ford Mustang 6-cylinder 2.8L, the 1964-1970 Mustang 6-cylinder 3.3L, the 1969-1973 Mustang 6-cylinder 4.1L and other vehicles seals the valve cover joint against oil leaks. The FEL-PRO valve cover gasket is a one-piece cork-rubber part made for imperfect sealing surfaces.
Oil seepage at the valve cover, an oil film on the cover or a burning-oil smell can mean this gasket is worn, though a cracked valve cover or loose cover bolts can be behind the same leak.
The 1966-1972 Ford Bronco 6-cylinder 2.8L, the 1973-1974 Bronco 6-cylinder 3.3L and the 1978-1983 Ford Fairmont 6-cylinder 3.3L are among the vehicles this set fits, and each of those engines takes one. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One valve cover gasket with hold-down tabs. Gasket sealant, an oil fill plug grommet and a PCV valve grommet are not included.
Interchange: RA1002 · 19024 · 44105 · C0DE6584B · C0DZ6584B · C9DE6584A · D0DZ6584A · E3BZ6584A · VS39564 · 618747 · CV874CE · Z2117 · Z2627 · Z2694 · PB2440 · VS2440 · VS707 · VS707G · R503R · 151053801
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Mustang valve cover gasket right for a 1964-1970 Ford Mustang 6-cylinder 3.3L?
Yes. FEL-PRO VS 12692 fits the 1964-1970 Ford Mustang 6-cylinder 3.3L, and it also fits the 1964-1965 Mustang 6-cylinder 2.8L and the 1969-1973 Mustang 6-cylinder 4.1L.
Do these Bronco valve cover gaskets fit the 1973-1974 Ford Bronco 6-cylinder 3.3L?
Yes. FEL-PRO VS 12692 fits the 1973-1974 Ford Bronco 6-cylinder 3.3L, and the 1966-1972 Bronco 6-cylinder 2.8L takes it as well. Each of those engines takes one.
Does the FEL-PRO valve cover gasket set include grommets or sealant?
No. The set is one valve cover gasket with hold-down tabs. Gasket sealant, an oil fill plug grommet and a PCV valve grommet are not included.
What is the FEL-PRO engine valve cover gasket set made of?
The gasket is Blue Stripe cork-rubber in a proprietary formulation, built as one piece. It measures 0.150 in thick and 26.234 in long.
How do I know if a cork-rubber valve cover gasket is leaking?
Look for oil seepage, an oil film or a burning-oil smell around the valve cover, with the engine off and cool. A shop can tell whether the gasket or another part is the source.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.