Vision OE Steering Gear P/N:N501-0108
TerrePower
TERREPOWER N501-0111 steering gear for the 1976-1979 Ford F-150 and other vehicles turns steering wheel rotation into power-assisted wheel movement. It is a new power steering gear, designed for dependable service across the life of the vehicle.
A worn steering gear can show up as loose or wandering steering, a groan when turning, or fluid seepage at the gear. A groan or loose feel alone does not prove the gear is at fault, since a worn tie rod end can feel much the same.
It fits the 1976-1979 Ford F-150, the 1976-1979 Ford F-250 and the 1976 Ford F-100, and a single gear is needed on each of them.
Fit and size
Build and materials
One steering gear and an installation kit.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the TERREPOWER N501-0111 steering gear fit a 1976-1979 Ford F-250?
Yes. TERREPOWER N501-0111 fits the 1976-1979 Ford F-250, and this listing is for one steering gear.
Does the TERREPOWER N501-0111 power steering gear come with an installation kit?
Yes. An installation kit is included with the steering gear.
What thread sizes are the ports on this power steering gear?
The pressure port thread is 1/2X20 and the return port thread is 5/8X18.
Can a groan when turning mean the steering gear is wearing out?
It can. Loose or wandering steering, or fluid seepage at the gear, can also point to wear, and a shop can test the gear to confirm.
How many turns lock to lock does the N501-0111 steering gear have?
TERREPOWER N501-0111 has 4 total turns lock to lock, with a 35-spline input shaft and a 32-spline output shaft.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.