Walker Exhaust 18593 exhaust muffler for the 1997-2000 Ford Explorer V6 4.0L quiets the noise of exhaust gases as they leave the engine. Like other Walker Exhaust mufflers in the SoundFX line, it has a steel body with an aluminized finish, which gives a longer service life than low-carbon steel.
- SoundFX line muffler with mechanical interior joints and spun-locked heads for durability and stability
- Steel body with an aluminized finish and an internal drainage system to help reduce corrosion
- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion
- Louvered tubes help reduce radiated noise for a factory-style sound
- Designed and tested to extend muffler life
Quick facts
- Part: Walker Exhaust 18593 exhaust muffler
- Fits: 1997-2000 Ford Explorer V6 4.0L
- Material: Steel
- Condition: New
A louder or deeper exhaust note, a rattle from inside the muffler, or visible rust and holes can mean the muffler is worn, though a leaking exhaust pipe joint or a failing hanger can be behind the same noise, so find the cause before you replace it.
Fits
This muffler fits the 1997-2000 Ford Explorer V6 4.0L.
Specifications
Fit and size
- Outlet inside diameter: 2 in
- Inlet offset: 2.875 in
- Inlet location: offset
- Outlet location: center
- Inlet and outlet type: pipe connection
- Shape: oval
- Quantity per vehicle: 1
Build and materials
- Material: steel
- Finish: aluminized
- Reversible: no
- Tunable: no
- Condition: new
- Country of origin: United States
In the box
One exhaust muffler. The 1997-2000 Ford Explorer V6 4.0L takes one.
Installation notes
- Bolt-on direct fit with factory-style hangers, brackets and pipe routings.
- No specialized fabrication or welding is needed.
Interchange: 700299
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is this Ford Explorer muffler the right one for the 1997-2000 model with the V6 4.0L engine?
Yes. Walker Exhaust 18593 is listed for the 1997-2000 Ford Explorer V6 4.0L, and that vehicle takes one muffler.
How does the Walker Exhaust SoundFX exhaust muffler resist corrosion?
Walker Exhaust 18593 has a steel body with an aluminized finish and an internal drainage system, and together they help reduce corrosion.
What are the outlet size and location on this muffler?
The outlet has a 2-inch inside diameter and sits at the center. The inlet is offset by 2.875 inches, and both ends are pipe connections.
Does this muffler need welding to install?
No. It is a bolt-on, direct-fit muffler that needs no specialized fabrication or welding.
How does this muffler keep the exhaust sound close to factory?
Louvered tubes inside the muffler help reduce radiated noise, which gives a factory-style sound rather than the tone of straight perforated tubes.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review