Walker Exhaust Exhaust Muffler P/N:21283
Walker Exhaust 21481 exhaust muffler for the 2004-2006 Chevrolet Colorado 4-cylinder 2.8L or 5-cylinder 3.5L, the 2007-2012 Colorado 4-cylinder 2.9L or 5-cylinder 3.7L and other vehicles quiets the exhaust as gases pass through on their way out. It gives OE-style sound with a precise fit.
A worn muffler can show up as a louder or rattling exhaust, or as rust holes and cracks in its body. Those signs can also come from other exhaust parts, so with the engine off and the exhaust cool, look over the visible muffler body, seams and hangers for holes, cracks or looseness before deciding the muffler is the cause.
This is a direct-fit replacement for the 2004-2006 Chevrolet Colorado 4-cylinder 2.8L or 5-cylinder 3.5L and the 2007-2012 Colorado 4-cylinder 2.9L or 5-cylinder 3.7L, and for the 2004-2006 GMC Canyon 4-cylinder 2.8L or 5-cylinder 3.5L and the 2007-2012 Canyon 4-cylinder 2.9L or 5-cylinder 3.7L. One muffler is needed per vehicle.
Fit and size
Build and materials
Interchange: 25878014 · 25878015
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a Chevy Colorado muffler for the 2004-2006 model with the 4-cylinder 2.8L or 5-cylinder 3.5L engine?
Yes. Walker Exhaust 21481 is listed for the 2004-2006 Chevrolet Colorado with either the 4-cylinder 2.8L or the 5-cylinder 3.5L engine.
Is this a Canyon muffler for the 2007-2012 GMC model with the 4-cylinder 2.9L or 5-cylinder 3.7L engine?
Yes. Walker Exhaust 21481 is listed for the 2007-2012 GMC Canyon with either the 4-cylinder 2.9L or the 5-cylinder 3.7L engine.
Are Walker Exhaust mufflers like this Quiet-Flow SS made of stainless steel?
Yes. This muffler is listed in stainless steel, and the Quiet-Flow SS line has 100% stainless-steel construction with an internal drainage system that helps reduce moisture collection.
What size are the inlet and outlet on this muffler?
Both the inlet and the outlet are 2.5 in inside diameter pipe connections. The inlet and outlet are both offset, and the inlet offset is 1.625 in.
Does this muffler need welding to install?
No. This is a bolt-on, direct-fit muffler with factory-style hangers, brackets and pipe routings, so it does not call for specialized fabrication or welding.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.