Walker Products Engine Variable Valve Timing (VVT) Solenoid P/N:590-1242
Walker Products 590-1074 left VVT solenoid for the 2008-2012 Nissan Pathfinder V8 5.6L and other vehicles controls oil flow to the cam phaser. As a variable valve timing solenoid, it sends pressurized oil to the cam phaser or VVT sprocket so valve timing can adjust to engine load and speed.
Over time a VVT solenoid can clog, stick open or closed, or fail electrically, which can bring fault codes, rough idle, hesitation or reduced power. Before you replace the solenoid, rule out other sources of the same codes, such as the wiring and connector, since a shop can test the circuit.
The vehicles it fits include the 2008-2012 Nissan Pathfinder V8 5.6L, the 2014-2018 Infiniti Q50 V6 3.5L and the 2014-2018 Infiniti Q70 V6 3.5L, and it is an OE replacement for them. Owners of other vehicles can look up their year, model and engine in the "Vehicles it fits" section. This listing is one solenoid for the left side; the 2008-2012 Nissan Pathfinder V8 5.6L takes one on that side, the right side is a separate part, and the two are normally replaced together.
Fit and size
Build and materials
Interchange: 7V-6011 · 73-12036 · 918-115 · 190-059 · 35-1086
2T1036 · VV1087 · 23796AR000 · 23796ZE00B · 23796ZE00D · 23796ZE01D · 23796ZE02D · VVT187 · VTS1110 · TS1036
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the Nissan Pathfinder vvt solenoid for 2008-2012 models with the V8 5.6L?
Yes. Walker Products 590-1074 is a left-side solenoid listed for the 2008-2012 Nissan Pathfinder V8 5.6L. The right side is a separate part.
Is this an Infiniti Q50 vvt solenoid for the 2014-2018 model with the V6 3.5L?
Yes. Walker Products 590-1074 is listed for the 2014-2018 Infiniti Q50 V6 3.5L as the left-side solenoid, and it takes one on that side.
What connector does the 590-1074 VVT solenoid have?
This solenoid has one black, rectangular female connector with two male terminals. Its housing is metal and it has one mounting hole.
Which fault codes can show up when a VVT solenoid sticks or fails electrically?
Codes such as P0010–P0014 and P0020–P0024 can appear, along with rough idle, hesitation or reduced power. A shop can test the circuit and the solenoid.
Does Walker 590-1074 interchange with 23796ZE00B?
Yes. 23796ZE00B is one of the numbers Walker Products 590-1074 replaces, along with 23796AR000 and 918-115.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.