Walker Products Engine Variable Valve Timing (VVT) Solenoid P/N:590-1016
Walker Products 590-1115 VVT solenoid for the 2006-2011 Mitsubishi Eclipse 4-cylinder 2.4L and other vehicles regulates oil flow to the camshaft phasing system. Also known as a variable valve timing solenoid, it replaces a unit that has clogged, stuck or failed electrically.
A solenoid that is clogged, sticking or failing electrically can set fault codes such as P0010–P0014 or P0020–P0024, or bring on a rough idle, hesitation or reduced power. Before you replace it, rule out low or dirty oil and wiring faults, because other problems can also set timing codes.
This VVT solenoid is also a direct-fit replacement for the 2004-2011 Mitsubishi Galant 4-cylinder 2.4L and the 2004-2006 Mitsubishi Lancer 4-cylinder 2.4L. The 2006-2011 Mitsubishi Eclipse 4-cylinder 2.4L takes one. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
Interchange: 7V-9038 · 73-12119 · 918-150 · 35-1139
2T1119 · TS1119 · 2VTS0119 · MN137240 · VVT241 · VTS1132
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this Walker Products 590-1115 VVT solenoid fit a 2006-2011 Mitsubishi Eclipse 4-cylinder 2.4L?
Yes. Walker Products 590-1115 fits the 2006-2011 Mitsubishi Eclipse 4-cylinder 2.4L. For another model or engine, open the "Vehicles it fits" section and check yours.
What kind of connector does the Walker 590-1115 solenoid have?
Walker Products 590-1115 has one black, oblong, female connector with male spade terminals. The connector is oil-sealed.
Which fault codes go with a failing VVT solenoid?
Codes in the P0010–P0014 and P0020–P0024 ranges can appear when a solenoid is clogged, sticking open or closed, or failing electrically. A shop can test it.
Is 2T1119 the same part as the Walker 590-1115?
Yes. 2T1119 is one of the cross-reference numbers for this Walker Products 590-1115 VVT solenoid, and it is printed on the Interchange line.
Does this VVT solenoid need any modification to install?
No. It uses the factory connector, wiring and mounting point, so no modification is required.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.