Walker Products Ignition Knock (Detonation) Sensor P/N:242-1159
Walker Products 242-1043 left ignition knock (detonation) sensor for the 1996-2000 Honda Civic 4-cylinder 1.6L and other vehicles detects engine knock and sends the signal to the ECU. It is an OE replacement component in the engine control system.
A check engine light with a code such as P0325 or P0330, or pinging under load, can be signs of a failing sensor. Before you replace it, rule out a damaged connector or wire and any other source of the knock or the fault code, because the same code or pinging can have a cause elsewhere.
It fits the 1996-2000 Honda Civic 4-cylinder 1.6L, the 1996-2004 Acura RL V6 3.5L and the 1996-1997 Honda Civic Del Sol 4-cylinder 1.6L. The left position takes one sensor, so this single sensor covers that position; a sensor for any other position is ordered separately.
Fit and size
Build and materials
One ignition knock (detonation) sensor. Mounting hardware and a wiring harness are not included; plan on new mounting hardware, since the old pieces may not be reusable.
Interchange: 213-2308 · 158-0821 · 104-014-F8 · 144-714
30530P2MA01 · 5S2140 · S8609 · AS10073 · KS49 · ID0089 · KS65 · 29012 · 29068 · SU4778
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Walker Products 242-1043 sensor the right one for a 1996-2000 Honda Civic 4-cylinder 1.6L?
Yes. Walker Products 242-1043 is a left-position ignition knock (detonation) sensor listed for the 1996-2000 Honda Civic 4-cylinder 1.6L, and the left position takes one.
Does this ignition knock (detonation) sensor come with a wiring harness or mounting hardware?
No. The box holds one ignition knock (detonation) sensor; the wiring harness and mounting hardware are not included.
What is the threaded end diameter of the Walker Products 242-1043 sensor?
The threaded end of Walker Products 242-1043 is 12 mm in diameter, and the sensor is 49.65 mm long. It has one blade terminal in a female, circle-shaped connector.
Which trouble codes can go with a failing ignition knock (detonation) sensor?
Codes such as P0325 or P0330 can appear with a failing sensor, along with pinging under load. A shop can scan the codes and test the circuit.
Does this sensor replace number 29012?
Yes. 29012 is one of the numbers this ignition knock (detonation) sensor replaces, so it cross-references to the 242-1043 part number.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.