Walker Products Mass Air Flow Sensor P/N:245-1269
Walker Products 245-1150 mass air flow sensor for the 2009-2013 Toyota Corolla 4-cylinder 2.4L and other vehicles measures the air entering the engine. That air flow data helps the ECU optimize the air-fuel ratio.
A rough idle, hesitation or poor fuel economy can mean the sensor is wearing out. A vacuum leak, a dirty air filter or a throttle body problem can be behind those signs as well, so find the cause before you buy. If a failed sensor is the cause, this one replaces it.
This sensor is listed for a wide range of models from Toyota, Lexus, Scion and other makes. Popular ones are the 2009-2013 Toyota Corolla 4-cylinder 2.4L, the 2007-2011 Toyota Camry 4-cylinder 2.4L or V6 3.5L and the 2010-2011 Camry 4-cylinder 2.5L, and the 2006-2012 Toyota RAV4. On the 2006-2012 Toyota RAV4 it is the maf sensor, and each car takes one. It is also an air flow sensor for the 2006-2012 Toyota RAV4. Driving something else? Look up your year and engine in the "Vehicles it fits" section. This listing is one sensor, which is what the 2009-2013 Toyota Corolla 4-cylinder 2.4L takes.
Fit and size
Build and materials
One mass air flow sensor with replacement Torx screws and the corresponding tools. The housing is not included.
Product information is for general reference and may contain errors. See our Disclaimer.
Is the Walker Products 245-1150 the right mass air flow sensor for a 2009-2013 Toyota Corolla 4-cylinder 2.4L?
Yes. Walker Products 245-1150 is listed for the 2009-2013 Toyota Corolla 4-cylinder 2.4L. For another car, look up its year and engine in the "Vehicles it fits" section.
Is this the mass air flow sensor for the 2007-2011 Toyota Camry 4-cylinder 2.4L or V6 3.5L and the 2010-2011 Camry 4-cylinder 2.5L?
Yes. Walker Products 245-1150 is listed for each of those Camry years and engines, and each car takes one sensor.
Does the Walker Products 245-1150 come with Torx screws, and is the housing included?
It comes with replacement Torx screws and the corresponding tools. The housing is not included, so this is a sensor-only replacement.
Can oil from my hands damage a mass air flow sensor during installation?
Yes. Oils on your hands or even air pollution can damage this mass air flow sensor. Some vehicle makers also recommend replacing the complete housing assembly so the connector air tubes are clean.
What kind of connector does the Walker Products 245-1150 have?
Walker Products 245-1150 has a female connector with 5 terminals.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.