Walker Products Mass Air Flow Sensor P/N:245-1244
Walker Products 245-1169 mass air flow sensor for the 1995-1996 Toyota Tacoma 4-cylinder 2.7L, the 1995-1997 Tacoma 4-cylinder 2.4L and other vehicles measures the air entering the engine so the ECU can adjust fueling. It comes as a complete sensor and housing assembly.
A weak mass air flow sensor can show up as a rough idle, hesitation or poor fuel economy. Before you replace the sensor, rule out a cracked intake tube, a loose connector or a vacuum leak, any of which can produce similar symptoms.
It is a maf sensor for the 1995-1996 Toyota Tacoma 4-cylinder 2.7L and a maf sensor for the 1995-1997 Tacoma 4-cylinder 2.4L. It also fits the 1996 Toyota 4Runner 4-cylinder 2.7L and the 1994-1997 Toyota T100 4-cylinder 2.7L. Any of these vehicles takes just one, and this listing is a single sensor.
Fit and size
Build and materials
One mass air flow sensor with its housing. Mounting hardware is not included, so plan on new fasteners, as the old ones may not be reusable.
Interchange: 213-3620 · 157-0248 · 105-045-H7 · 64-1687 · 917-963
5S2892 · 220127 · MF20127 · AF10209 · MAF0053 · MAS0365 · 2225075010 · SU5184
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this one of the mass air flow sensors for the 1995-1997 Toyota Tacoma 4-cylinder 2.4L?
Yes. Walker Products 245-1169 fits the 1995-1997 Toyota Tacoma 4-cylinder 2.4L and the 1995-1996 Toyota Tacoma 4-cylinder 2.7L, with one sensor per vehicle.
Is this the mass air flow sensor for the 1996 Toyota 4Runner 4-cylinder 2.7L?
Yes. Walker Products 245-1169 fits the 1996 Toyota 4Runner 4-cylinder 2.7L, and the vehicle takes one sensor.
Does this Walker Products mass air flow sensor include the housing and mounting hardware?
The housing is included, since it comes as a sensor and housing assembly. Mounting hardware is not included.
How many terminals does the connector on this mass air flow sensor have?
The connector on this mass air flow sensor is female and has 3 terminals.
Is this mass air flow sensor programmed and tested before it is sold?
Yes. Each sensor is programmed and tested for fit, form and function. Its calibration goes through 100% production testing and on-vehicle verification.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.