Walker Products Mass Air Flow Sensor P/N:245-2219
Walker Products 245-1298 mass air flow sensor for the 2009-2014 Volkswagen Jetta 4-cylinder 2.0L and other vehicles measures the air entering the engine. The ECU uses that reading to help set the air-fuel mix, and the sensor's long-term fuel trim percentages meet or exceed OE figures.
Hesitation, a rough idle or a check engine light can mean the sensor is worn, though a leak in the intake air tube or a clogged air filter can also be behind them, so find the cause before you replace the sensor.
As a VW Jetta mass air flow sensor, it covers the 2009-2014 Jetta 4-cylinder 2.0L. It is listed for a wide range of Volkswagen and Audi models, led by the 2010-2014 Volkswagen Golf 4-cylinder 2.0L and the 2010-2013 Audi A3 4-cylinder 2.0L. If your car is not one of these, open the "Vehicles it fits" section and check your exact model and engine there.
Fit and size
Build and materials
One mass air flow sensor with its housing. This listing is one sensor, and the engine takes one. Mounting hardware is not included, so plan on new fasteners.
Interchange: MFDL-1298 · 10.1357 · 8ET 009 149-181
0281002735 · FDM990 · 86217 · MAS0374 · MA326 · 19660 · 03G906461C
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this maf sensor fit a VW Jetta from 2009-2014 with the 4-cylinder 2.0L?
Yes. Walker Products 245-1298 is listed for the 2009-2014 Volkswagen Jetta 4-cylinder 2.0L. For other models, open the "Vehicles it fits" section and check your exact model and engine.
Is this VW Golf mass air flow sensor right for a 2010-2014 model with the 4-cylinder 2.0L?
Yes. Walker Products 245-1298 is listed for the 2010-2014 Volkswagen Golf 4-cylinder 2.0L.
Does this mass air flow sensor include its housing and mounting hardware?
Yes for the housing, no for mounting hardware, so plan on new fasteners. This listing is one sensor.
What connector does this mass air flow sensor use?
It has a female connector with 5 terminals.
Can skin oils damage this mass air flow sensor during installation?
Yes. Oils from your hands, or even air pollution, can damage the sensor, so handle it carefully. Some vehicle makers also suggest replacing the whole housing assembly to keep the connector air tubes clean.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.