Walker Products Oxygen Sensor P/N:350-341076
Walker Products 350-34340 right oxygen sensor for the 1999-2001 Volkswagen Golf 4-cylinder 2.0L, the 1999-2002 Golf V6 2.8L, the 2000-2006 Golf 4-cylinder 1.8L and other vehicles measures the oxygen left in the exhaust gas. The Walker Products oxygen sensor is made for its specific application and fitment position, and it gives the ECU the diagnostic feedback it needs.
Poor engine running, higher fuel consumption or a lit malfunction indicator light can point to a worn sensor, though a damaged wiring harness or connector can be behind them too, so look over both before you replace the sensor.
The 1999-2001 Volkswagen Jetta 4-cylinder 1.8L or 2.0L and the 2011-2015 Volkswagen Clasico 4-cylinder 2.0L take this sensor too, one per vehicle, along with many other models. It is also an O2 sensor for the 2000-2006 VW Golf 4-cylinder 1.8L. If your car is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: CTK-OSVW4005
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Walker Products 350-34340 one of the VW Jetta oxygen sensors for the 1999-2001 Volkswagen Jetta 4-cylinder 1.8L or 2.0L?
Yes. Walker Products 350-34340 is listed for the 1999-2001 Volkswagen Jetta 4-cylinder 1.8L or 2.0L, and each of those takes one sensor.
Is this the VW Golf oxygen sensor for the 1999-2001 Volkswagen Golf 4-cylinder 2.0L?
Yes. Walker Products 350-34340 is listed for the 1999-2001 Volkswagen Golf 4-cylinder 2.0L, the 1999-2002 Golf V6 2.8L and the 2000-2006 Golf 4-cylinder 1.8L.
Is this oxygen sensor narrow-band or wideband, and how many wires does it have?
This oxygen sensor is a narrow-band design with 4 wires and an M18 - 1.5 thread.
Which signs can a failing oxygen sensor show?
The engine can run poorly, fuel consumption can go up, or the malfunction indicator light can come on. Newer vehicles may also store fault codes in the ECU.
What does the coating on this oxygen sensor's electrodes do?
The coating prevents contamination and erosion of the electrode surfaces by combustion residue and particulates in the exhaust gas. The electrodes use a gas-permeable platinum layer.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.