Walker Products 350-34889 right oxygen sensor for the 2014-2016 Porsche Panamera V6 3.0L measures exhaust oxygen to show combustion efficiency. This Walker Products oxygen sensor is a 4-wire, narrow-band unit made for its specific application and fitment position, and it gives the ECU the diagnostic feedback it needs.
Coating protects the electrode surfaces from contamination and erosion by combustion residue and particulates in the exhaust gas
Electrodes made of a gas-permeable platinum layer
Oxygen readings help fine-tune the air-fuel mixture to support fuel economy
Monitors exhaust gases to help reduce pollutants
Quick facts
Part: Walker Products 350-34889 oxygen sensor
Fits: 2014-2016 Porsche Panamera V6 3.0L
Position: Downstream right
Condition: New
A failing sensor can show up as rough running, higher fuel consumption or a lit malfunction indicator light, and newer vehicles may store a fault code in the ECU. These signs alone do not prove the sensor is the problem, since a vacuum leak can also make an engine run poorly. The sensor, wiring harness and connector should also be checked for physical damage.
Fits
It is a direct-fit replacement for the 2014-2016 Porsche Panamera V6 3.0L.
Specifications
Fit and size
Position: downstream right
Quantity per vehicle: 1
Build and materials
Type: narrow-band, 4-wire
Electrodes: gas-permeable platinum layer
Coated electrode surfaces
Condition: New
In the box
One oxygen sensor. The right downstream position takes one; the left side is a separate part.
Frequently Asked Questions
Does the Walker Products 350-34889 fit the 2014-2016 Porsche Panamera V6 3.0L?
Yes. The Walker Products 350-34889 is a direct-fit right downstream oxygen sensor for the 2014-2016 Porsche Panamera V6 3.0L, which takes one in this position.
Is this a narrow-band or a wideband oxygen sensor?
It is narrow-band, with four wires. The Walker Products 350-34889 is built for its specific application and fitment position.
Is this the upstream or the downstream oxygen sensor?
It is the downstream sensor on the right side. This listing is one sensor, and the left side is a separate part.
Can a bad oxygen sensor turn on the check engine light?
It can. A failing oxygen sensor might cause rough running, higher fuel consumption or a lit malfunction indicator light.
What does the coating on this oxygen sensor do?
The coating keeps combustion residue and particulates in the exhaust gas from contaminating or eroding the electrode surfaces. The electrodes are made of a gas-permeable platinum layer.
Walker 350-341095 oxygen sensor for the 2016-2019 Toyota Yaris R 4-cylinder 1.5L and other vehicles measures the oxygen content of the exhaust gas. It passes that reading back to the engine computer...
Walker 350-341076 oxygen sensor for the 2018-2024 Volkswagen Tiguan 4-cylinder 2.0L and other vehicles measures the oxygen in the exhaust gas. It sends the ECU the diagnostic feedback it needs...
The oxygen sensor measures combustion efficiency based off the amount of oxygen in the exhaust gas.Walker Products 350-64008 Oxygen Sensor 4-W Air Fuel Ratio Wide-BandWalker Products Engine...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
