Keep the front wheels turning smoothly and quietly with the SKF wheel bearing FW202, a front press-in wheel bearing for front-wheel-drive (FWD) applications. It is a direct-fit replacement for the 2015-2020 Acura TLX and the 2013-2017 Honda Accord, and the same part number fits either the left or right side.
A front wheel bearing lets the hub rotate with low friction while helping support the vehicle's load. SKF's angular-contact design handles both radial and axial loads, whether you are replacing a worn 2013-2017 Honda Accord wheel bearing or the bearing on a 2015-2020 Acura TLX.
Signs that a front wheel bearing may need replacing include a humming or growling noise that rises with vehicle speed, looseness or play in the wheel, and uneven tire wear. If a worn bearing is the cause, this unit replaces it. Diagnose the noise before ordering, because tires and other components can make similar sounds. See the Buyer's Guide tab for engine details on each application.
Interchange: AU1029-4 · 735-1110
AU10294 · 44300TZ3A01 · DL510118 · WE60389 · 44300t2aa51 · 44300T2AA61 · MB60313 · 510118 · 7351110 · WB000072 · WB000078
This part cross-references / interchanges with the following part numbers:
Which vehicles does the SKF FW202 fit?
It fits the 2015-2020 Acura TLX and the 2013-2017 Honda Accord as a front press-in wheel bearing for FWD applications. See the Buyer's Guide tab for engine details.
Is this the right 2014 Honda Accord wheel bearing?
The 2013-2017 Honda Accord is a listed application for FW202 as a front press-in bearing for FWD models. The Buyer's Guide tab lists the engine details.
Does FW202 fit the left or right side?
It fits either side. SKF lists this front wheel bearing for the left or right position.
What signs suggest a front wheel bearing may need replacing?
A humming or growling noise that changes with speed, play in the wheel, or uneven tire wear can come from a worn bearing. Diagnose the cause first, because tires and other parts can make similar noises.
How is a press-in wheel bearing installed?
A press-type bearing is pressed into place rather than bolted on, so installation typically requires a hydraulic press and the correct adapters. Follow the vehicle service information for the procedure.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
