Dorman - First Stop Drum Brake Wheel Cylinder P/N:W17507
Put dependable hydraulic force back behind your rear drum brakes with this Dorman drum brake wheel cylinder, part number W370051 from the First Stop line, which converts pressure from the master cylinder into the force that pushes the brake shoes out against the drum. It fits many vehicles, among them the 1996-2007 Dodge Grand Caravan, 1996-2007 Chrysler Town & Country and 1996-2008 Chrysler Voyager. See the Buyer's Guide tab for the full list and engine details.
Dorman engineered this rear wheel cylinder to match the fit, function and performance of the original unit on the listed applications. Each one is manufactured and tested for quality assurance.
Signs a wheel cylinder may need replacing include brake fluid seeping from the boots or onto the shoes and drum, a soft or low brake pedal, or a pull to one side when braking. Diagnose the cause before replacing any part. Replacing the wheel cylinders on both sides of the axle at the same time is recommended for even, balanced braking.
Interchange: 784-14702 · 84-14702 · W-53702 · 072-9299 · 134.50002 · 134.50005 · 135.50002 · 135.50005 · 375-40004
78414702 · 8414702 · W53702 · 0729299 · 13450002 · 13450005 · 13550002 · 13550005 · 37540004 · 18E1139 · W906766 · 34164 · 34206 · 4883830A · 4883830AA · 5093236AA · WC14164 · WC250820 · 0K01126610 · 0K55226610 · WC370191 · F131966 · WC131966
This part cross-references / interchanges with the following part numbers:
What does a drum brake wheel cylinder do?
It receives hydraulic pressure from the master cylinder. Pistons and cups inside it push the brake shoes outward against the drum to slow the wheel.
Does the Dorman W370051 fit a 1996-2007 Dodge Grand Caravan?
Yes. The 1996-2007 Dodge Grand Caravan is a listed application for this rear wheel cylinder, as are the 1996-2007 Chrysler Town & Country and 1996-2008 Chrysler Voyager.
What are the cups and boots made of?
This wheel cylinder uses high-quality EPDM rubber cups and boots. The bores are surface-tested to provide an optimum sealing surface for the pressure cups.
What are signs a wheel cylinder may need replacing?
Look for brake fluid leaking from the boots or onto the shoes and drum, a soft or low pedal, or a pull to one side when braking. Diagnose the cause before replacing any part.
Should I replace both rear wheel cylinders at once?
Replacing both sides together is recommended for even, balanced braking. Bleed the brake system after installation, following the vehicle's service information.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.