Help hold each wheel firmly against the hub with the Dorman wheel lug stud, part number 610-324.1, an M12-1.50 serrated carbon steel stud from the Dorman - Autograde line. It fits many vehicles, among them the 1990-2001 Chevrolet Lumina, 1995-2001 Chevrolet Monte Carlo and 1988-2003 Pontiac Grand Prix, and is cataloged for both front and rear wheel positions as a direct-fit replacement for the listed applications. See the Buyer's Guide tab for the full list.
This serrated wheel stud has a 12.70mm knurl and a 34.5mm length. The knurled section presses into the mounting flange, and the M12-1.50 threads accept the lug nut that clamps the wheel in place.
- Durable material: carbon steel that meets SAE automotive industry standards for strength and hardness.
- Corrosion resistant: put through extensive salt spray testing to help it hold up against rust.
- Tensile tested: the studs go through industry-standard proof-load testing to verify their strength.
- Trustworthy quality: supported by a U.S.-based team of professional engineers and quality control specialists.
Signs a stud may need replacing include stripped or damaged threads, a lug nut that will not tighten properly, and a stud that is bent or broken. Replace studs with the wheel removed, and follow the vehicle service information for installation and lug nut torque.
Interchange: DN610-324
DN610324 · 9590474 · 99729
This part cross-references / interchanges with the following part numbers:
DN610-324, 9590474, 99729
