ADVICS K6F143U front brake rotor for the 2006-2012 Ford Fusion and other vehicles gives the brake pads a surface to clamp against when you slow the vehicle. ADVICS brake rotors like this one are constructed to OEM weight, vane count and air gap.
- Part of the ADVICS OE Replacement line
- Vented rotor that lets air flow freely, with a smooth surface
- High carbon metallurgy for thermal stability and less chance of warping
- Corrosion protection coating
- Non-directional brake surface finish
Quick facts
- Part: ADVICS K6F143U brake rotor
- Also called: disc brake rotor
- Fits: the 2006-2012 Ford Fusion and other vehicles
- Position: Front
- Material: High Carbon
- Condition: New
Pedal pulsation, grooves or cracks in the surface, or a thickness near the 23.0 mm discard figure can mean a disc brake rotor is due for replacement. Other brake parts can cause similar signs, so during a brake service, measure the thickness and look over the surface before you buy. This listing is one rotor, and a 2006-2012 Ford Fusion takes two, so both front sides are normally replaced together.
Fits
This rotor fits the 2006-2012 Ford Fusion, the 2006-2013 Mazda 6 and the 2007-2012 Lincoln MKZ, along with many other vehicles. If your car is not one of these, run its year, make and model through the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
- Outside diameter: 299.0 mm (11.772 in)
- Center hole diameter: 72 mm
- Bolt circle: 114.3 mm (4.5 in), 5 lug holes
- Nominal thickness: 25.0 mm (0.984 in)
- Discard thickness: 23.0 mm (0.906 in)
- Overall height: 48.7 mm (1.917 in)
Build and materials
- Type: Vented
- Surface: Smooth, non-directional finish
- Material: High Carbon
- Corrosion protection coating
- ABS tone ring: not included
- Condition: New
- Country of origin: China
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Are these Ford Fusion rotors for 2006-2012 models front or rear?
They are front rotors. ADVICS K6F143U fits the 2006-2012 Ford Fusion, and a Fusion takes two.
Is this Mazda 6 brake rotor made for 2006-2013 models?
Yes. ADVICS K6F143U fits the 2006-2013 Mazda 6 as a front rotor, and the car takes two.
What is the discard thickness of the ADVICS K6F143U rotor?
Nominal thickness is 25.0 mm (0.984 in) and the discard thickness is 23.0 mm (0.906 in). A rotor measuring at or below the discard figure is due for replacement.
Is this ADVICS rotor vented, and what is it made of?
Yes, it is a vented rotor with a smooth surface. The material is high carbon, with a corrosion protection coating.
Does this front rotor come with an ABS tone ring?
No. The ABS tone ring is not included with this ADVICS K6F143U rotor, so the listing is the rotor alone.
