Anchor Automatic Transmission Mount,Manual Transmission Mount P/N:10056
$84.99
(You save)
Quiet driveline vibration and keep the transmission properly located with the Anchor Rear Transmission Mount 10056, a direct-fit replacement for the 2005-2007 Toyota Sequoia and 2005-2006 Toyota Tundra. Listed as both an Automatic Transmission Mount and a Manual Transmission Mount, this rear mount helps support and locate the transmission while isolating vibration between the powertrain and the chassis.
Supports and isolates: holds the transmission in position and dampens vibration for smoother, quieter operation.
Purpose-built rubber: molded from natural and Styrene Butadiene rubber that resists wear and stays stable as it ages, helping the mount last.
Strong rubber-to-metal bond: Chemlock® bonding agent is used for a superior bond between the rubber and metal.
Application-tuned hardness: the rubber is manufactured to a specific Durometer (hardness) based on vehicle application requirements; any included fasteners are hardened steel with heat-treated Grade 5 bolts.
Engineered and designed to OE standards using a CAD/CAM process for consistent quality. If a worn or cracked rear mount is behind powertrain movement, vibration at idle, or a clunk on acceleration or shifting, this replaces it.
This part cross-references / interchanges with the following part numbers:
A72033, B72033, 123710F080, 3118, EM7492
Manufacturer's Warranty: 12 Month Warranty.
Frequently Asked Questions
What vehicles does this mount fit?
It's a direct-fit replacement for the 2005-2007 Toyota Sequoia and 2005-2006 Toyota Tundra. See the Buyer's Guide tab to confirm fitment for your vehicle.
Is this a front or rear mount?
This is the rear transmission mount. It helps support and locate the transmission while isolating vibration from the chassis.
Does it work for both automatic and manual transmissions?
It is cataloged as both an Automatic Transmission Mount and a Manual Transmission Mount, so it is listed under both names.
What are signs this mount may need replacing?
Common signs include vibration at idle, a clunk on acceleration, deceleration, or shifting, and cracked or separated rubber. Diagnose the cause before replacing.
What is the mount made of?
It uses natural and Styrene Butadiene rubber bonded to metal with Chemlock® bonding agent, molded to an application-specific Durometer hardness.
Write a Review
Anchor
Anchor Automatic Transmission Mount,Manual Transmission Mount P/N:10056
Quiet driveline vibration and keep the transaxle firmly located with the Anchor Transmission Mount 10020, the left-side mount that supports the transmission and dampens vibration. It drops in as a...
Keep the powertrain settled and quiet with the Anchor Automatic Transmission Mount / Manual Transmission Mount 10156, a left-side mount that helps support and locate the transmission while isolating...
Tame driveline vibration and keep the transmission properly located with the Anchor Left Automatic / Manual Transmission Mount 10164. This left-side mount helps support and locate the transmission...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
