Anchor Automatic Transmission Mount,Manual Transmission Mount P/N:10156
$85.99
(You save)
Keep the powertrain settled and quiet with the Anchor Automatic Transmission Mount / Manual Transmission Mount 10156, a left-side mount that helps support and locate the transmission while isolating vibration from the chassis. It drops in as a direct-fit replacement for the 2007-2013 Volvo C30, 2007-2013 Volvo C70, 2007-2012 Volvo S40, and 2007-2011 Volvo V50 — see the Buyer's Guide tab for the full engine-level list.
Supports and dampens: holds the transmission in position and helps limit movement while cushioning noise and vibration.
Rubber construction: built with natural and Styrene Butadiene rubber that resists wear and stays stable as it ages.
Bonded for strength: Chemlock® bonding agent is used for a superior rubber-to-metal bond.
Application-tuned: rubber is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements.
Engineered to OE standards using a CAD/CAM process for consistency and quality. Signs the original may need replacing include clunks on acceleration, deceleration, or shifting, vibration felt at idle, and cracked or separated rubber. If a worn mount is the cause, this replaces it. Any included fasteners are hardened steel with heat-treated Grade #5 bolts; consult the vehicle service information for the correct fasteners and whether they may be reused.
This part cross-references / interchanges with the following part numbers:
A70052, B70052, 3267H, 31316498, EM7432
Manufacturer's Warranty: 12 Month Warranty.
Frequently Asked Questions
What does this transmission mount do?
It helps support and locate the transmission while isolating and dampening vibration and noise between the powertrain and the chassis.
Which vehicles does the Anchor 10156 fit?
It is a direct-fit replacement for the 2007-2013 Volvo C30, 2007-2013 Volvo C70, 2007-2012 Volvo S40, and 2007-2011 Volvo V50. See the Buyer's Guide tab for engine-level detail.
What position is this mount?
This is the left-side transmission mount for the listed applications.
How do I know if my mount is worn?
Common signs include clunks on acceleration, deceleration, or shifting, vibration felt at idle, and cracked or separated rubber. Diagnose the cause before replacing.
Are mounting fasteners included?
Any included fasteners are hardened steel with heat-treated Grade #5 bolts. Consult the vehicle service information for the correct fasteners and whether they may be reused.
Write a Review
Anchor
Anchor Automatic Transmission Mount,Manual Transmission Mount P/N:10156
Quiet driveline vibration and keep the transaxle firmly located with the Anchor Transmission Mount 10020, the left-side mount that supports the transmission and dampens vibration. It drops in as a...
Quiet driveline vibration and keep the transmission properly located with the Anchor Rear Transmission Mount 10056, a direct-fit replacement for the 2005-2007 Toyota Sequoia and 2005-2006 Toyota...
Tame driveline vibration and keep the transmission properly located with the Anchor Left Automatic / Manual Transmission Mount 10164. This left-side mount helps support and locate the transmission...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
