Anchor Automatic Transmission Mount,Manual Transmission Mount P/N:9715
$54.99
(You save)
Tame transmission-driveline vibration and keep the gearbox properly located with the Anchor Transmission Mount 9715, cataloged as both an Automatic Transmission Mount / Manual Transmission Mount. It's a direct-fit replacement for the 2005-2010 Scion tC, installed in the LEFT-side position. This mount helps support and locate the transmission while isolating and dampening vibration.
Support & isolation: supports the transmission and dampens vibration to limit movement transferred into the chassis.
Rubber material: uses only natural and Styrene Butadiene rubber that resists wear and stays stable as it ages for maximum life and performance.
Bonded construction: a Chemlock® bonding agent creates a superior rubber-to-metal bond.
Built to OE standards: engineered and designed to OE standards using a CAD/CAM process, with rubber manufactured to specific Durometer (hardness) measurements based on vehicle application requirements.
Signs the original mount may need replacing include added vibration at idle, and a clunk on acceleration, deceleration, or shifting from excess powertrain movement, or visibly cracked or separated rubber. Any included fasteners are hardened steel with heat-treated Grade #5 bolts. This part is listed under both the automatic and manual transmission mount names.
It's a direct-fit replacement for the 2005-2010 Scion tC. See the Buyer's Guide tab to confirm the correct application and engine for your vehicle.
What does this transmission mount do?
It helps support and locate the transmission while isolating and dampening vibration, limiting powertrain movement transferred into the chassis. It is cataloged for the LEFT-side position.
How do I know if my transmission mount is worn?
Common signs include extra vibration at idle, a clunk on acceleration, deceleration, or shifting from excess powertrain movement, or visibly cracked or separated rubber. Diagnose the cause before replacing.
What is this mount made of?
It uses only natural and Styrene Butadiene rubber that resists wear and stays stable as it ages, bonded with a Chemlock® agent for a superior rubber-to-metal bond and built to OE standards.
Are mounting fasteners included?
Any included fasteners are hardened steel with heat-treated Grade #5 bolts. Consult the vehicle service information for the correct fasteners and whether they may be reused.
Write a Review
Anchor
Anchor Automatic Transmission Mount,Manual Transmission Mount P/N:9715
Keep the rear of the transmission supported and quiet with the Anchor Rear Automatic / Manual Transmission Mount 10111. It drops in as a direct-fit replacement for the 2012-2015 Toyota Tacoma (see...
Quiet a shifting, vibrating powertrain and keep the transmission properly located with the Anchor Rear Transmission Mount 2891. This rear mount supports the transmission and dampens vibration, and it...
Silence transmission vibration and keep the rear of the driveline properly located with the Anchor Rear Transmission Mount 2884. This rear mount helps support and position the transmission while...
Steady the driveline and soak up transmission vibration with the Anchor Automatic Transmission Mount / Manual Transmission Mount 3115, the left-side mount that helps support and locate the...
Tame driveline shake and keep the gearbox properly located with the Anchor Rear Automatic/Manual Transmission Mount 3163. This rear mount helps support and locate the transmission while isolating and...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
