Anchor 3364 right engine mount for the 2013-2016 Dodge Dart 4-cylinder 2.0L supports the engine and dampens vibration. This Anchor motor mount is a hydraulic type.
- Special hydraulic fluid fill to dampen excess noise and vibration
- Natural and Styrene Butadiene rubber that resists abrasion and holds up as it ages
- Chemlock® bonding agent for the rubber-to-metal bond
- Rubber made to specific Durometer (hardness) measurements for the application
- Aluminum mount with a rubber bushing
Quick facts
- Part: Anchor 3364 engine mount
- Fits: 2013-2016 Dodge Dart 4-cylinder 2.0L
- Position: Right
- Material: Aluminum
- Condition: New
A clunk when accelerating, decelerating or shifting, vibration at idle, or cracked or separated rubber can mean a mount is worn. A worn transmission mount, another engine mount or a loose bracket can be behind these signs too, so find the cause before buying.
Fits
This mount fits the 2013-2016 Dodge Dart 4-cylinder 2.0L, and the car takes one on the right side.
Specifications
Fit and size
- Position: Right
- Quantity per vehicle: 1
- Mounting hole diameter: 20 mm (0.79 in)
- Mounting hole quantity: 7
Build and materials
- Type: Hydraulic
- Construction: Stamped
- Mount material: Aluminum
- Bracket material: Aluminum
- Bushing material: Rubber
- Finish: Uncoated
- Condition: New
- Warranty: Anchor 12-month warranty
- Country of origin: China
In the box
One right engine mount. Mounting hardware, a mounting bracket and a heat shield are not included, so plan on new fasteners, since the old ones may not be reusable.
Interchange: 117-5899-6
A5674 · 68081488AH · C5674 · 5627H · 4350H · EM4239
This part cross-references / interchanges with the following part numbers:
117-5899-6, A5674, 68081488AH, C5674, 5627H, 4350H, EM4239
Frequently Asked Questions
Will the Anchor 3364 work as a 2016 Dodge Dart 4-cylinder 2.0L engine mount?
Yes. Anchor 3364 is a right-side engine mount for the 2013-2016 Dodge Dart 4-cylinder 2.0L, and the car takes one on that side.
Does the Anchor 3364 come with mounting bolts or a bracket?
No. This listing is one right engine mount. Mounting hardware, a mounting bracket and a heat shield are not included.
What rubber is used in Anchor engine mounts?
Anchor mounts use natural and Styrene Butadiene rubber, bonded to the metal with Chemlock® bonding agent. On the 3364, the bushing is rubber and the mount is aluminum.
What are the signs of a worn right engine mount like the Anchor 3364?
Cracked or separated rubber you can see with the engine off, a clunk when shifting or accelerating, and vibration at idle can all mean a worn mount.
Is the Anchor 3364 a hydraulic engine mount?
Yes. Anchor 3364 is a hydraulic type, filled with special hydraulic fluid to dampen excess noise and vibration.
