Arnott Industries Air Suspension Strut P/N:AS-3407
Arnott Industries AS-2139 front air suspension strut for the 2003-2006 Ford Expedition and other vehicles supports the front end with an air spring and a shock absorber. The strut is a complete assembly built with OE-quality components.
A sagging front end, a bouncy ride or a cracked or leaking air spring bladder can mean this strut is worn. Those signs alone do not prove the strut is at fault; a leaking air line is another common cause. This listing is one strut, and both front sides are normally replaced together.
It fits the 2003-2006 Ford Expedition and the 2003-2006 Lincoln Navigator. Two go on the front axle, one on each side.
Fit and size
Build and materials
One air suspension strut with the upper mount, custom shock absorber, air spring assembly, pre-installed solenoid, seal kit, mounting hardware, upper and lower mounting isolators and spring isolators. The spring seat, bearing plate and boot are not included.
Interchange: 3L1Z18124CA · 3L1Z18124DA · 6L1Z3C199AA · AU2Z18124F · AU2Z18124J · AU2Z18124K
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Arnott Industries AS-2139 front air suspension strut right for the 2003-2006 Lincoln Navigator?
Yes. Arnott Industries AS-2139 fits the 2003-2006 Lincoln Navigator as well as the 2003-2006 Ford Expedition, with one strut on each side of the front axle.
Does this Arnott air suspension strut come with the solenoid and seal kit?
Yes. The AS-2139 comes with the upper mount, custom shock absorber, air spring assembly, pre-installed solenoid and seal kit. The spring seat, bearing plate and boot are not included.
What kind of shock absorber is inside this air strut?
The shock inside this strut is hydraulic and gas charged, with custom valving. Its damping and compression are not adjustable.
How can I tell if a front air suspension strut is wearing out?
A sagging ride height, a bouncy ride or cracks in the air spring bladder can mean the strut is worn. A shop can test the air system if you are unsure.
Does this air suspension strut need assembly before installing?
No. The strut arrives pre-assembled with the solenoid already in place. A detailed installation manual and a video are available for the steps.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.