Arnott Industries SK-3394 rear shock absorber for the 2011-2021 Jeep Grand Cherokee and other vehicles controls rear suspension movement after bumps. Also called a suspension shock absorber, it damps the up-and-down motion of the rear wheel.
- Custom valved and thoroughly road tested for ride control
- Polyurethane bump stop
- Protective dust boot
Quick facts
- Part: Arnott Industries SK-3394 shock absorber
- Also called: suspension shock absorber
- Fits: 2011-2021 Jeep Grand Cherokee and other vehicles
- Position: Rear
- Condition: New
A worn shock can show up as repeated bouncing after a bump, nose-dive under braking or an oily film on the shock body. With the engine off, press down on a parked rear corner and let go; more than one rebound can mean the shock is tired. The rear springs, mounts and bushings can cause similar ride complaints, so look them over before you replace the shock.
Fits
This shock fits the rear of the 2011-2021 Jeep Grand Cherokee and the 2022 Jeep Grand Cherokee WK, and the rear axle takes two. This listing is one shock; the other side of that axle is normally done at the same time.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Sold individually: 1 shock per listing
Build and materials
- Grade: Standard Replacement
- Bump stop: polyurethane
- Dust boot: protective, included
- Condition: New
- Country of origin: United States
In the box
One shock absorber, supplied with its top and bottom mounts.
This part cross-references / interchanges with the following part numbers:
24-225427, 68069675AC, 68069675AD, 68069676AC, 68069676AD, 68069680AB, 68069680AC, 68069680AD, 68069680AE, 68069680AF, 68069680AG, 68069680AH, 68084523AB, 68084523AC, 68231889AA, 68234048AA, 68234048AB, 68234049AA, 68234049AB, 68234050AA, 68234050AB
Frequently Asked Questions
Is this a shock absorber for the 2011-2021 Jeep Grand Cherokee?
Yes. Arnott Industries SK-3394 fits the rear of the 2011-2021 Jeep Grand Cherokee and the 2022 Jeep Grand Cherokee WK.
Does this rear shock absorber come with mounts?
Yes. This rear shock comes with top and bottom mounts, plus a polyurethane bump stop and a protective dust boot.
Is the Arnott SK-3394 a standard replacement shock?
Yes. Arnott Industries SK-3394 has a Standard Replacement grade type, and it is custom valved for ride control.
Can bouncing after bumps mean a rear shock is worn?
Yes, it can. Repeated bouncing, nose-dive under braking or an oily shock body can each point to a worn shock, and a shop can confirm it.
Is this Arnott rear shock designed and assembled in the USA?
Yes. Arnott designs and assembles SK-3394 in the USA, and the shock is thoroughly road tested.
