Autobest HP1060A fuel pump and strainer set for the 1990-1996 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles moves fuel from the tank to the engine. This in-tank Autobest fuel pump draws fuel in through its strainer and sends it out through a quick-connect outlet.
- Turbine pump with an average flow rating of 31.7 GPH
- Pump pressure from 7.25 PSI minimum to 21.76 PSI maximum
- Ethanol tolerance for today's fuel systems
- POM housing with an NBR gasket or seal
- Tested at many points throughout the manufacturing process for durability and reliability
Quick facts
- Part: Autobest HP1060A fuel pump and strainer set
- Fits: the 1990-1996 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles
- Position: Front, rear
- Material: POM housing, NBR gasket or seal
- Condition: New
A worn pump can show up as hard starting, sputtering or stalling under load, or a whine from the tank. If the pump is the cause, this set replaces it. Before you order, look over the fuel pump fuse and its wiring plug with the engine off, and leave fuel pressure testing to a shop.
Fits
The 1990-1996 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L, the 1990-1996 F-250 6-cylinder 4.9L, V8 5.0L, 5.8L or 7.5L and the 1990-1992 Bronco 6-cylinder 4.9L and 1990-1996 Bronco V8 5.0L or 5.8L all take this set, and so do other Ford vehicles. Open the "Vehicles it fits" section and look up your exact model and engine to check your own.
Specifications
Fit and size
- Position: front, rear
- Quantity per vehicle: 1
- Voltage: 12V
- Average flow rating: 31.7 GPH
- Pump pressure: 7.25 PSI minimum, 21.76 PSI maximum
- Average current draw: 6 A
- Inlet: strainer; outlet: 1, quick connect
Build and materials
- Pump type: turbine, in tank, internal strainer
- Housing material: POM
- Gasket or seal material: NBR
- Grade: Performance
- Negative ground: yes
- Condition: new
- Country of origin: China
In the box
One fuel pump and strainer set, supplied as a pump and kit with the strainer and a gasket or seal. Not included: wire harness, fuel filter, fuel sending unit, fuel tank pressure sensor and regulator. This listing holds one set, which matches the quantity per vehicle.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this one of the fuel pumps for a 1990-1996 Ford F-150 with the V8 5.8L?
Yes. Autobest HP1060A fits the 1990-1996 Ford F-150 with the 6-cylinder 4.9L, V8 5.0L or V8 5.8L engine, one set per vehicle.
Is this the right fuel pump for a 1990-1996 Ford F-250 with the V8 7.5L?
Yes. Autobest HP1060A fits the 1990-1996 Ford F-250 with the 6-cylinder 4.9L, V8 5.0L, 5.8L or 7.5L engine.
What flow rating and pressure does this turbine fuel pump have?
This turbine pump has an average flow rating of 31.7 GPH, with a pump pressure range of 7.25 PSI minimum to 21.76 PSI maximum on 12V.
Does this fuel pump set come with the fuel filter and wire harness?
No. This set comes as a pump and kit with the strainer and a gasket or seal; the wire harness, fuel filter, fuel sending unit, fuel tank pressure sensor and regulator are not included.
Is the Autobest HP1060A fuel pump ethanol tolerant?
Yes. The HP1060A has ethanol tolerance for today's fuel systems. Its housing is POM and its gasket or seal is NBR.
