Baldwin Fuel Water Separator Filter P/N:BF1395-SP
Baldwin Filters
Baldwin BF1274-SP fuel water separator filter for the 2002 Kenworth T800 6-cylinder 15.0L, the 2002-2018 T800 6-cylinder 14.9L, the 2011-2018 T800 6-cylinder 11.9L and other vehicles and equipment separates water from the fuel before it reaches the engine.
Hard starting, rough running or water in the fuel can mean this filter is worn out or clogged, though a fuel line leak or a weak fuel pump can be behind the same signs, so find the cause before replacing it. The 2013-2017 Freightliner 122SD 6-cylinder 14.9L takes one.
This spin-on separator filter fits the 2013-2017 Freightliner 122SD 6-cylinder 14.9L and the 2011-2017 Western Star 4900EX 6-cylinder 14.9L. If your truck or machine isn't named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One fuel water separator filter with one O-ring and one gasket.
Interchange: GPP-1007S · FF1115-SP · 5839-FS1007
Cummins 3331096 · Fleetguard FS1007 · BF1264SP · 95423 · 86423 · 4010650 · FSR81007 · PS8688 · 2NUF9 · PMFS1007 · SN40550 · XA3387 · FS357 · 3423 · F75326 · 33423
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Baldwin BF1274-SP fit the 2013-2017 Freightliner 122SD 6-cylinder 14.9L?
Yes. This Baldwin BF1274-SP fuel water separator filter fits the 2013-2017 Freightliner 122SD 6-cylinder 14.9L. Find another truck or machine by its year and engine in the "Vehicles it fits" section.
Does this fuel water separator filter come with an O-ring?
Yes. The filter comes with one O-ring and one gasket.
What thread and size is the Baldwin BF1274-SP separator filter?
The Baldwin BF1274-SP has an M85 x 2.0 thread and an M14 x 2.0 sensor port thread. Its outside diameter is 118.3 mm (4 21/32 in) and its height is 295.3 mm (11 5/8 in).
Can I reuse the sensor from a BF1274-SPS on this filter?
Yes. For service, keep the reusable sensor from the BF1274-SPS and attach it to the BF1274-SP.
What can I use to plug the sensor port on this separator filter?
On this separator filter, an OP8753 plug can be used to close the sensor port, which has an M14 x 2.0 thread.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.