Beck/Arnley 085-1731 rear brake pad for the 2005-2010 Jeep Grand Cherokee and other vehicles clamps against the rotor when you brake to slow the wheel.
- Direct replacement for Original Equipment (OE) applications, with attention to form, fit and function
- Made with the same pad material type that originally came on the vehicle (ceramic, semi-metallic, or NAO)
- Precision cut edges for a proper fit
- Bonded shims help reduce braking noise
- Post-cured, so no break-in is needed
A worn disc brake pad can show up as squealing, grinding or a longer stopping distance. A sticking caliper, a grooved rotor or a failing wheel bearing can cause similar noise or feel, so find out which part is at fault before you buy pads.
The same rear brake pad is a direct replacement for the 2004-2015 Nissan Titan and the 2005-2015 Nissan Armada, along with a wide range of other vehicles. If your car is not named here, run it through the "Vehicles it fits" section to see whether this set suits it.
Specifications
- Position: Rear
- Pad material type: same as originally on the vehicle
- Edges: precision cut
- Shims: bonded
- Cure: post-cured
In the box: one rear brake pad set. Pads on the same axle wear together, so they are normally replaced together.
Interchange / FMSI:
FMSI: D1041 · D1041CT · 7945D1041
Interchange: 17D1041CH · AT1015 · AT1041 · ACT1041 · 10510410 · 440607S025 · 44060ZC025 · 44060ZC026 · D40609FE0A · PGD1041C · SGD1041C · QC1041
This part cross-references / interchanges with the following part numbers:
17D1041CH, AT1015, AT1041, ACT1041, D1041, D1041CT, 10510410, 440607S025, 44060ZC025, 44060ZC026, D40609FE0A, 7945D1041, PGD1041C, SGD1041C, QC1041
Frequently Asked Questions
Do these 2005-2010 Jeep Grand Cherokee brake pads go on the front or the rear?
They go on the rear. Beck/Arnley 085-1731 is a set of 2005-2010 Jeep Grand Cherokee rear brake pads, and owners of other vehicles can look up their car in the "Vehicles it fits" section.
What pad material does Beck/Arnley 085-1731 use?
Beck/Arnley makes these pads with the same pad material type that originally came on the vehicle, which can be ceramic, semi-metallic or NAO.
Is this Beck/Arnley brake pad post-cured, and does it need break-in?
Yes, the pads are post-cured, which removes the need for break-in.
Do these rear pads have bonded shims, and what do they do?
Yes. Bonded shims on this rear brake pad set help reduce braking noise.
Does AT1041 interchange with Beck/Arnley 085-1731?
Yes. Beck/Arnley 085-1731 replaces AT1041, and the other numbers it replaces include AT1015 and ACT1041.
