Beck/Arnley Steering Tie Rod End P/N:101-7294
Keep the steering connected and precise with the Beck/Arnley Steering Tie Rod End 101-3555, a front outer tie rod end that links the steering linkage to the steering knuckle and transmits your steering input to the wheel. It's a direct-fit replacement for the 1979-1983 Peugeot 504, 1980-1990 Peugeot 505, and 1979-1984 Peugeot 604 — see the Buyer's Guide tab for engine-level details.
Worn tie rod ends are a common cause of loose, wandering steering, uneven tire wear, and a clunk or knock when turning. If a failed outer tie rod end is the source, this replaces it. Tie rod ends often wear as a pair — inspect the opposite side and replace both if needed, and have the wheel alignment set afterward.
Interchange: 45A0791 · 1014350 · 61210001 · 532956 · ES2878 · 381718
This part cross-references / interchanges with the following part numbers:
What does this tie rod end do?
It connects the steering linkage to the steering knuckle and transmits your steering input to the front wheel, pivoting to allow suspension and steering movement.
Is this a front outer tie rod end?
Yes. The catalog lists it as the front outer position for the listed applications.
Which vehicles does it fit?
It's a direct-fit replacement for the 1979-1983 Peugeot 504, 1980-1990 Peugeot 505, and 1979-1984 Peugeot 604. Check the Buyer's Guide tab to confirm your vehicle.
What are signs my tie rod end may need replacing?
Loose or wandering steering, uneven tire wear, and a clunk or knock when turning are common signs. Diagnose the cause before replacing, as other parts can share these symptoms.
Do I need an alignment after installing it?
Yes, a wheel alignment is recommended after replacing a tie rod end to restore correct toe settings and protect tire wear.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.