Beck/Arnley Steering Tie Rod End P/N:101-3317
Beck/Arnley 101-6694 front left outer tie rod end for the 2003-2008 Infiniti FX35 and other vehicles links the steering linkage to the steering knuckle. As the outer end of the linkage, it lets the front left wheel turn as the steering moves, and some catalogs list it as a steering tie rod end.
A worn tie rod end can show up as loose or wandering steering, a clunk over bumps or uneven front tire wear. Before you replace it, rule out worn ball joints, wheel bearings or tire problems, which can feel similar, and have play checked at a shop if you are unsure.
It matches OE form, fit and function and is a direct-fit replacement for the 2003-2008 Infiniti FX35 and the 2003-2008 Infiniti FX45. This listing is one tie rod end for the front left outer position; the front right is a separate part, and the two sides of that axle are normally done at the same time. A 2003-2008 Infiniti FX35 takes one tie rod end at this position.
Fit and size
Build and materials
One tie rod end. The adjusting sleeve is not included.
Interchange: 45A0997 · 61242119 · D8E20CG80A · TO61101 · TO61101XL · 43924012352 · 48520CG025 · ES800428 · ES4191 · MS30610 · JTA1487
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this tie rod right for the 2003-2008 Infiniti FX35?
Yes. Beck/Arnley 101-6694 is a front left outer tie rod end for the 2003-2008 Infiniti FX35, and it also fits the 2003-2008 Infiniti FX45.
Does the Beck/Arnley tie rod end come with an adjusting sleeve?
No. The adjusting sleeve is not included. This listing is one tie rod end for the front left outer position.
Is the ball joint on this tie rod end pre-greased?
Yes. The ball joint on Beck/Arnley 101-6694 is pre-greased, and the part is coated or plated for corrosion protection.
What are the signs a front left outer tie rod end is wearing out?
Loose or wandering steering, a clunk over bumps and uneven front tire wear can all go with a worn tie rod end. A shop can check the joint for play.
Does ES800428 cross to this tie rod end?
Yes. ES800428 is one of the other-brand numbers that Beck/Arnley 101-6694 replaces; the full list is on the Interchange line.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.