Beck/Arnley 101-6730 front left outer tie rod end for the 2009-2012 Hyundai Genesis V8 4.6L, the 2009-2015 Genesis V6 3.8L, the 2012-2014 Genesis V8 5.0L and other vehicles joins the inner tie rod to the steering knuckle so steering input turns the wheel. Also called a steering tie rod end, it is the pivoting joint between the steering linkage and the knuckle.
- Coated or plated for corrosion protection
- Pre-greased ball joint
- Full ball stud
- Easy-access wrench flat lets a socket be used for installation and removal
Quick facts
- Part: Beck/Arnley 101-6730 tie rod end
- Also called: steering tie rod end
- Fits: 2009-2012 Hyundai Genesis V8 4.6L, the 2009-2015 Genesis V6 3.8L, the 2012-2014 Genesis V8 5.0L and other vehicles
- Position: Front left outer
- Condition: New
A worn tie rod end can show up as loose or wandering steering, a clunk over bumps or uneven tire wear. A worn ball joint, a worn control arm bushing or an alignment problem can be behind those signs too, so find the cause before you buy.
Fits
This tie rod end fits the 2009-2012 Hyundai Genesis V8 4.6L, the 2009-2015 Genesis V6 3.8L, the 2012-2014 Genesis V8 5.0L and the 2011-2014 Hyundai Equus, and it matches OE form, fit and function. This listing is one tie rod end for the front left. The 2011-2014 Hyundai Equus takes one on this side, the front right is a separate part, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: front left outer
- Quantity per vehicle: 1 for this side
Build and materials
- Type: outer tie rod end
- Ball joint: pre-greased
- Finish: coated or plated
- Condition: New
Interchange: 8420490 · 61251051 · 568203M000 · 568203M900 · ES801248 · ES4755E · MS90614
This part cross-references / interchanges with the following part numbers:
8420490, 61251051, 568203M000, 568203M900, ES801248, ES4755E, MS90614
Frequently Asked Questions
Will the 101-6730 tie rod end fit a 2012-2014 Hyundai Genesis V8 5.0L?
Yes. Beck/Arnley 101-6730 fits the 2012-2014 Hyundai Genesis V8 5.0L at the front left outer position. The front right side is a separate part.
Is this Beck/Arnley tie rod end pre-greased?
Yes. The ball joint on this tie rod end comes pre-greased, and the stud is a full ball stud.
How is this outer tie rod end protected from rust?
The part is coated or plated for corrosion protection.
Does the wrench flat on this tie rod end make installation easier?
Yes. The easy-access wrench flat lets you use a socket to install and remove the tie rod end.
Is 568203M000 an interchange number for this tie rod end?
Yes. 568203M000 is one of the numbers that Beck/Arnley 101-6730 replaces.
