Beck/Arnley Steering Tie Rod End P/N:101-6869
Keep steering input connected at the front right wheel with the Beck/Arnley Tie Rod End 101-7893, the front right outer Nissan Altima tie rod for 2013-2018 models that also fits the 2016-2023 Nissan Maxima. See the "Vehicles it fits" section for engine details.
This steering tie rod end is the outer link between the steering rack's tie rod and the steering knuckle. It passes your steering input to the wheel while pivoting as the suspension moves. Beck/Arnley designs it as a direct replacement for the original part, with close attention to OE form, fit and function. Its product specialists work with a global sourcing network, and each part is built to meet Beck/Arnley's own requirements and specifications.
Signs this part may need replacing include loose or wandering steering, a clunk when turning, and uneven tire wear. These symptoms can have other causes, so inspect the steering and suspension first. If a worn outer tie rod end is the cause, this part replaces it. A wheel alignment is recommended after installation.
Interchange: 61242097 · D85203TA0A · TO69062 · ES801196 · MS30667
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this Nissan Altima tie rod end fit my 2013 Altima?
Yes. It is listed for the 2013-2018 Nissan Altima in the front right outer position. See the "Vehicles it fits" section for engine details.
Which position does this tie rod end install in?
It is cataloged for the front right outer position.
What features does the Beck/Arnley 101-7893 have?
It matches OE form, fit and function. It is coated or plated for corrosion protection and has a pre-greased ball joint, a full ball stud and a wrench flat that accepts a socket.
What are the signs a tie rod end may need replacing?
Common signs include loose or wandering steering, a clunk when turning, and uneven tire wear. Other parts can cause these symptoms, so inspect the steering and suspension before replacing it.
Do I need an alignment after installing it?
Yes, an alignment is recommended because replacing a tie rod end affects the wheel's toe setting. Use the vehicle service information for torque specs and the correct fasteners.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.